How Should I Inspect the Control Arm Balljoints on Dodge Durango?

Inspect the control arm balljoints for looseness anytime they are separated from the steering knuckle. Check for up to 0.020-inch movement with a dial indicator or have it checked at an automotive repair shop. If replacement is indicated, replace the upper or lower control arm. For the lower balljoint, a special press tool and receiver cup is needed to remove and install the balljoint. If you don't have access to this tool, take the vehicle to an automotive machine shop or other qualified repair facility.

Genuine Dodge Durango Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ball Joints found

View related parts
Dodge Durango BALLJOINT-Lower Control Arm
Part Number: 68069648AB
$117.61 MSRP: $177.00
You Save: $59.39 (34%)
ADD TO CART
Product Specifications
- Other Name: Ball Joint Kit Lower Control Arm; Lower Ball Joint
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Dodge Durango | Citadel AWD, Citadel RWD, Crew AWD, Crew RWD, Express AWD, Express RWD, Heat AWD, Heat RWD, Limited AWD, Limited RWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango BALLJOINT-Lower Control Arm
Part Number: 5143570AA
$133.30 MSRP: $200.00
You Save: $66.70 (34%)
ADD TO CART
Product Specifications
- Other Name: Ball Joint Package Lower Control Arm; Lower Ball Joint
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer 2WD, Adventurer 4WD, Limited 2WD, Limited 4WD, Limited HEV 4WD, SE 2WD, SE 4WD, SLT 2WD, SLT 4WD, ST 2WD, ST 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Dodge Durango BALLJOINT-Lower Control Arm
Part Number: 52106222AA
$173.71 MSRP: $259.00
You Save: $85.29 (33%)
ADD TO CART
Product Specifications
- Other Name: Ball Joint Lower Control Arm; Lower Ball Joint
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Dodge Durango | Base 4WD, R/T 4WD, SLT 4WD, SLT Plus 4WD, Sport 4WD | 8 Cyl 4.7L, 8 Cyl 5.9L
View related parts
Dodge Durango BALLJOINT-Lower Control Arm
Part Number: 68298603AB
$77.24 MSRP: $118.00
You Save: $40.76 (35%)
ADD TO CART
Product Specifications
- Other Name: Ball Joint Kit Lower Control Arm; Lower Ball Joint
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2023 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, SRT 392 AWD, SRT AWD, SRT Hellcat AWD, SXT AWD, SXT RWD, Special Service AWD, Special Service RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L

Dodge Durango Ball Joint

The Ball Joint of Dodge Durango vehicles is an important suspension and steering equipment as it links control arms to the steering knuckles. These members permit the rotation of the body in two perpendicular directions and also exclude the translation; this improves the vehicle maneuverability and stability. American cars such as Dodge Durango use both the upper and lower ball joints particularly in the suspension system, while in some high-performance vehicles there are ball joints in the rear suspension as well. A Dodge Durango Ball Joint is a steel forged bearing stud with a socket and can be fitted with a rubber-like boot that aids in preventing dirt accumulation while also enabling the lubricant to pass through. These newer modern ball joints have increasingly displaced the older kingpin designs in the caster and camber angles as the ways to adjust them can be created without compromise on compliance. These bursts have created the durability of these ball joints and changes in the bearing design and dust boot seals so that the services will last longer and the performance is improved.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Durango Ball Joint at great affordable prices. Moreover, all genuine Dodge Durango Ball Joint come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Durango Ball Joint Parts Questions & Experts Answers

BALLJOINT-Lower Control Arm
5143570AA
Q: How Should I Inspect the Control Arm Balljoints on Dodge Durango?
A: Inspect the Control Arm balljoints for looseness anytime they are separated from the Steering Knuckle. Check for up to 0.020-inch movement with a dial indicator or have it checked at an automotive repair shop. If replacement is indicated, replace the upper or lower control arm. For the lower balljoint, a special press tool and receiver cup is needed to remove and install the balljoint. If you don't have access to this tool, take the vehicle to an automotive machine shop or other qualified repair facility.

Genuine Dodge Durango Ball Joint

4 Ball Joints found

Dodge Durango BALLJOINT-Lower Control Arm

Dodge Durango BALLJOINT-Lower Control Arm

Dodge Durango BALLJOINT-Lower Control Arm

Dodge Durango BALLJOINT-Lower Control Arm

Dodge Durango Ball Joint

Dodge Durango Ball Joint Parts Questions & Experts Answers

Related Dodge Durango Parts

Browse by Year