How to remove and install the vibration damper and Crankshaft Pulley in 3.3L and 3.8L V6 engine on Dodge Grand Caravan?

Disconnect the negative battery cable from the battery, then loosen the lug nuts on the right front wheel. Raise the vehicle and support it securely on jackstands before removing the wheel. Take out the right front inner fender splash shield and the serpentine drivebelt. Remove the driveplate cover and use a large screwdriver in the ring gear teeth to prevent the crankshaft from turning while an assistant removes the vibration damper-to-crankshaft bolt, utilizing a breaker bar and socket. Pull the damper off the crankshaft with a two-jaw puller, ensuring the jaws only contact the hub of the pulley and not the outer ring. For installation, reverse the removal process, applying clean engine oil or multi-purpose grease to the seal contact surface of the damper hub to prevent damage to the seal lip and oil leakage. Finally, tighten the vibration damper-to-crankshaft bolt to the specified torque and reinstall the remaining parts in reverse order.

Genuine Dodge Grand Caravan Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Crankshaft Pulleys found

View related parts
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 5184293AH
$158.76 MSRP: $241.00
You Save: $82.24 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaces: 5184293AC, 5184293AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Grand Caravan | C/V, Crew, Express, GT, LUX, Mainstreet, R/T, SE, SXT | 6 Cyl 3.6L
View related parts
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 5184293AC
$158.76 MSRP: $241.00
You Save: $82.24 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 5184293AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Dodge Grand Caravan | C/V, Crew, Express, LUX, Mainstreet, R/T, SE, SXT | 6 Cyl 3.6L
View related parts
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 5184293AG
$158.76 MSRP: $241.00
You Save: $82.24 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 5184293AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2015 Dodge Grand Caravan | Crew, R/T, SE, SXT | 6 Cyl 3.6L
View related parts
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 4666099AB
$295.54 MSRP: $441.00
You Save: $145.46 (33%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Grand Caravan | C/V, Crew, Hero, SE, SXT | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Grand Caravan PULLEY-CRANKSHAFT Air Compressor D
Part Number: MD319994
$27.69 MSRP: $35.24
You Save: $7.55 (22%)
ADD TO CART
Product Specifications
- Other Name: PULLEY Crankshaft; Damper Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Dodge Grand Caravan | Base, LE FWD, SE FWD | 6 Cyl 3.0L
View related parts
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 68027598AA
$145.51 MSRP: $216.00
You Save: $70.49 (33%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 68027598AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013 Dodge Grand Caravan
- 2008-2011 Dodge Grand Caravan | Crew, SXT
View related parts
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: MD354781
$190.59 MSRP: $220.00
You Save: $29.41 (14%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Dodge Grand Caravan | Base, LE FWD, SE FWD | 6 Cyl 3.0L
View related parts
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: MD143435
Product Specifications
- Other Name: PULLEY, Crankshaft - Alternator Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-2000 Dodge Grand Caravan | Base, LE AWD, LE FWD, SE FWD | 6 Cyl 3.0L
View related parts
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 4448886
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-2007 Dodge Grand Caravan | Base, C/V, EL, ES AWD, ES FWD, EX, LE AWD, LE FWD, SE, SE AWD, SE FWD, Sport AWD, Sport FWD, SXT AWD, SXT FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 4892135AA
Product Specifications
- Other Name: DAMPER Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Grand Caravan | Crew, SXT | 6 Cyl 4.0L
View related parts
Dodge Grand Caravan PULLEY Asm Drive
Part Number: 3870074
Product Specifications
- Other Name: PULLEY, Drive; Crankshaft Pulley, Idler Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987 Dodge Grand Caravan
View related parts
Dodge Grand Caravan DAMPER-Engine Vibration
Part Number: 4694268
Product Specifications
- Other Name: DAMPER Engine Vibration
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2003 Dodge Grand Caravan | Base, C/V, EL, ES FWD, LE FWD, SE, SE FWD, Sport FWD | 4 Cyl 2.4L
View related parts
Dodge Grand Caravan PULLEY-V-Belt Drive
Part Number: 4483413
Product Specifications
- Other Name: PULLEY, Drive; Crankshaft Damper, Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1989-1995 Dodge Grand Caravan | LE AWD, LE FWD, SE FWD | 4 Cyl 2.5L

Dodge Grand Caravan Crankshaft Pulley

In Dodge Grand Caravan automobiles, the Performance Crankshaft Pulley functions as an important component that turns power in relation to the automobile's engine in connecting to other part like the power steering pump, A/C compressor, and alternation. Being bolted to the crankshaft directly, the Performance Crankshaft Pulley provides torque transmission and at the same time counteract engine vibrations, and thus is often referred to as the harmonic balance wheel. There have been several models of Performance Crankshaft Pulley which have used in Dodge Grand Caravan cars over the years with the intention of improving their performance and efficiency. These pulleys may be of different constructions and material which may affect their operational efficiency in distributing power or in accordance to their vibration control purposes. The changes in the Performance Crankshaft Pulley demonstrate improvements in technology employed in vehicles to enhance the general performance of the Dodge Grand Caravan.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Grand Caravan Crankshaft Pulley at great affordable prices. Moreover, all genuine Dodge Grand Caravan Crankshaft Pulley come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Grand Caravan Crankshaft Pulley Parts Questions & Experts Answers

DAMPER-CRANKSHAFT
4666099AB
Q: How to remove and install the vibration damper and Crankshaft Pulley in 3.3L and 3.8L V6 engine on Dodge Grand Caravan?
A: Disconnect the negative battery cable from the battery, then loosen the lug nuts on the right front wheel. Raise the vehicle and support it securely on jackstands before removing the wheel. Take out the right front inner fender splash shield and the serpentine drivebelt. Remove the driveplate cover and use a large screwdriver in the ring gear teeth to prevent the crankshaft from turning while an assistant removes the vibration damper-to-crankshaft bolt, utilizing a breaker bar and socket. Pull the damper off the crankshaft with a two-jaw puller, ensuring the jaws only contact the hub of the pulley and not the outer ring. For installation, reverse the removal process, applying clean engine oil or multi-purpose grease to the seal contact surface of the damper hub to prevent damage to the seal lip and oil leakage. Finally, tighten the vibration damper-to-crankshaft bolt to the specified torque and reinstall the remaining parts in reverse order.