×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Grand Caravan Harmonic Balancer
Engine Harmonic Balancer- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Harmonic Balancers found
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 5184293AH$158.76 MSRP: $241.00You Save: $82.24 (35%)
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 5184293AC$158.76 MSRP: $241.00You Save: $82.24 (35%)
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 5184293AG$158.76 MSRP: $241.00You Save: $82.24 (35%)
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 4666099AB$295.54 MSRP: $441.00You Save: $145.46 (33%)
Dodge Grand Caravan PULLEY-CRANKSHAFT Air Compressor D
Part Number: MD319994$27.69 MSRP: $35.24You Save: $7.55 (22%)
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: 68027598AA$145.51 MSRP: $216.00You Save: $70.49 (33%)
Dodge Grand Caravan DAMPER-CRANKSHAFT
Part Number: MD354781$190.59 MSRP: $220.00You Save: $29.41 (14%)
Dodge Grand Caravan DAMPER-Engine Vibration
Part Number: 4694268AB$97.58 MSRP: $126.00You Save: $28.42 (23%)
Dodge Grand Caravan Harmonic Balancer
In Dodge Grand Caravan, The Harmonic Balancer is responsible with balancing the engine and absorbing vibrations which occur as a result of combustion cycle. This element is called the vibration damper: it operates as a metal cage secured with a crankshaft in the middle, covering a thick inertia ring and a rubber ring which has to twist in order to counter twist. A good functioning of the harmonic balancer is crucial for smooth running of the engine and in cases such as deformation of the rubberized portions, either through age or exposure to unfavourable conditions excessive vibrations and in extreme cases crank shaft damage might be realised. There are many specifically built-for use Dodge Grand Caravan models, and they employ a number of harmonic balancers, which are standard original equipment (OE) as well as performance. While OE harmonic balancers target factory prescribed engine parameters, performance harmonic balancers are made for tuned up engines since modified engines produce higher vibrations at higher revolutions. Such performance options include the traditional, the viscous fluid, and the multi-piece, which have been proved safe at high RPM, and include other qualities like the 360 degrees time mark for accurate engine tuning.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Grand Caravan Harmonic Balancer at great affordable prices. Moreover, all genuine Dodge Grand Caravan Harmonic Balancer come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Grand Caravan Harmonic Balancer Parts Questions & Experts Answers
- Q: How do you remove and install a vibration damper and Crankshaft Pulley in 3.0L V6 engine on Dodge Grand Caravan?A: It is advised that before removing the vibration damper, you should loss the negative terminal of your car battery. Lose the right front lug nuts, raise the front of the car and securely place on jack stands, remove the right inner splash shield and the right front wheel. After that, remove the accessory drive belts. Take out the bolts holding the pulley on the vibration damper then take the pulley off, with the crankshaft pulley being in two halves whereby the damper locks in place using the keyway. Coil the belt with some cloth to avoid abrasive contact with the outer casing of the vibration damper because rough handling might damage the belt This will enable holding of the pulley with a chain wrench. It is advisable to halt the crankshaft from rotating and employing a socket wrench to counter-clockwise unscrew the damper bolt. In the case of the absence of a chain wrench, it is advisable to construct a crank holding tool using angle iron and bolts or as an option, you can do away with the flywheel/driveplate cover and thus freeze the crank. After that, shall remove the vibration damper although it may be tightly fixed requiring the use of a puller, but shall not use the jaw type puller. For installation, apply engine lightly oil on the surface of the seal then place the seal on the crankshaft nose to ensure that the key way on the pulley suits the key on the crankshaft then gently push the pulley on. If this does not work, gently knock the damper several times with a piece of wood and a hammer if required. Stop the crankshaft from rotating and then use the bolt to fasten the crankshaft to the required amount of torque-then replace all the removed parts in their reverse order.
Related Dodge Grand Caravan Parts
Browse by Year
2020 Harmonic Balancer 2019 Harmonic Balancer 2018 Harmonic Balancer 2017 Harmonic Balancer 2016 Harmonic Balancer 2015 Harmonic Balancer 2014 Harmonic Balancer 2013 Harmonic Balancer 2012 Harmonic Balancer 2011 Harmonic Balancer 2010 Harmonic Balancer 2009 Harmonic Balancer 2008 Harmonic Balancer 2007 Harmonic Balancer 2006 Harmonic Balancer 2005 Harmonic Balancer 2004 Harmonic Balancer 2003 Harmonic Balancer 2002 Harmonic Balancer 2001 Harmonic Balancer 2000 Harmonic Balancer 1999 Harmonic Balancer 1998 Harmonic Balancer 1997 Harmonic Balancer 1996 Harmonic Balancer 1995 Harmonic Balancer 1994 Harmonic Balancer 1993 Harmonic Balancer 1992 Harmonic Balancer 1991 Harmonic Balancer 1990 Harmonic Balancer