×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Magnum Door Latch Assembly
Door Latch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Door Latch Assemblys found
Dodge Magnum Front Left Door Lock Actuator
Part Number: 4589071AC$135.28 MSRP: $203.00You Save: $67.72 (34%)
Dodge Magnum Front Right Door Lock Actuator
Part Number: 4589072AC$91.59 MSRP: $136.00You Save: $44.41 (33%)
Dodge Magnum Door Latch Assembly
The Door Latch Assembly of Dodge Magnum cars has an important purpose of holding the doors of the car and locking it in order to avoid intruders from gaining access to the interior of the car. This assembly has the possibility of using different forms of locking which can be automatic or manual, where there is an opportunity to isolate the door locking either individually or collectively. Dodge Magnum How various styles of Door Latch Assembly were used over the years Part Description The styles of Door Latch Assembly have evolved over the years with the primary purpose of improving both the strength of the car doors and the ease of usage. However, these assemblies may need to be replaced due to common problems, most of which include sticking of the outer door handles, latches that do not release smoothly, or problems with the engaging and disengaging of the door lock button.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Magnum Door Latch Assembly at great affordable prices. Moreover, all genuine Dodge Magnum Door Latch Assembly come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Magnum Door Latch Assembly Parts Questions & Experts Answers
- Q: How to remove and install a door latch,Door Lock Cylinder and outside door handle on Dodge Magnum?A: Raise the window completely and remove the door trim panel and water shield. Remove the door speaker. Remove the fasteners at the rear glass run channel and move the channel away from the latch (Remove the fasteners securing the pull cup bracket). This provides a little extra working room in the latch area inside the door. Rotate the plastic retaining clips off the rods, then detach the latch links. Disconnect the electrical connector. Remove the three mounting screws (it may be necessary to use an impact-type screwdriver to loosen them), then remove the latch from the door ( Remove the latch mounting screws). Place the latch in position and install the screws. Tighten the screws securely. Connect the link rods and electrical connector to the latch. The remainder of installation is the reverse of removal. Remove the outside door handle. Withdraw the lock cylinder from the door handle. Installation is the reverse of removal. Remove the door trim panel. Remove the door speaker. Remove the fasteners at the rear glass run channel and move the channel away from the latch. This provides a little extra working room in the latch area inside the door. Disconnect the link rods from the outside handle, remove the mounting fasteners and carefully detach the handle from the door. Place the handle in position, attach the link and install the nuts. Tighten the fasteners securely. The remainder of installation is the reverse of removal.
