How to replace the key lock cylinder and ignition switch in a Dodge Magnum?

If the key is hard to turn, the issue may not be the ignition switch or Ignition Lock Cylinder, but could be due to a misaligned transmission shift cable or Brake Transmission Shift Interlock (BTSI) cable. To replace the Ignition Lock Cylinder, disconnect the battery, remove the ignition switch and instrument cluster bezel, insert the key and turn it to ON, depress the retaining pin and remove the cylinder. Ensure the key is in ON position and align the D-shaped lug with the socket before installing the new cylinder. To replace the ignition switch, disconnect the battery, disable the airbag, remove the knee bolster and reinforcement panel, disconnect the electrical connectors and BTSI cable, and remove the switch. The Sentry Key Remote Entry Module (SKREEM) recognizes the key's encrypted RF signal, unlocking the doors and allowing the engine to start. If the key or SKREEM is replaced, reprogramming is required at a dealership.

Genuine Dodge Magnum Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ignition Switches found

View related parts
Dodge Magnum Switch-Ignition
Part Number: 4685719AB
$60.83 MSRP: $91.60
You Save: $30.77 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch Ignition
- Replaced by: 4685719AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Magnum Switch-Ignition
Part Number: 4685719AD
$60.83 MSRP: $91.60
You Save: $30.77 (34%)
ADD TO CART
Product Specifications
- Other Name: Switch Ignition
- Replaced by: 4685719AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Magnum Switch-Ignition
Part Number: 4685863AE
Product Specifications
- Other Name: Switch Ignition
- Replaced by: 4685863AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Magnum Switch Ignition
Part Number: 4685863AA
Product Specifications
- Other Name: Ignition Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SXT AWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L

Dodge Magnum Ignition Switch

The Ignition Switch in Dodge Magnum vehicles is responsible for the ignition and charging system that is responsible for starting the engine and controlling additional electrical systems including the radio as well as the power windows. Through twisting the ignition switch key, push button or press the remote control button, the computer of the car calls for starter solenoid and the ignition components to start the engine. Automotive Dodge Magnum models have in the past used mechanical based key ignition switches where one is supposed to use the correct key to unlock the switch. However, developments have seen manufacturers put in place keyless ignition systems whereby the car is started by a push of a button, although the signal for the button is drawn from a transponder. The main purpose remains the same but a progressive change from mechanical switches to keyless systems make a basic change in the design of the Dodge Magnum Ignition Switch and it improves on convenience while not compromising on security.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Magnum Ignition Switch at great affordable prices. Moreover, all genuine Dodge Magnum Ignition Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Magnum Ignition Switch Parts Questions & Experts Answers

Switch-Ignition
4685719AB
Q: How to replace the key lock cylinder and ignition switch in a Dodge Magnum?
A: If the key is hard to turn, the issue may not be the ignition switch or Ignition Lock Cylinder, but could be due to a misaligned transmission shift cable or Brake Transmission Shift Interlock (BTSI) cable. To replace the Ignition Lock Cylinder, disconnect the battery, remove the ignition switch and instrument cluster bezel, insert the key and turn it to ON, depress the retaining pin and remove the cylinder. Ensure the key is in ON position and align the D-shaped lug with the socket before installing the new cylinder. To replace the ignition switch, disconnect the battery, disable the airbag, remove the knee bolster and reinforcement panel, disconnect the electrical connectors and BTSI cable, and remove the switch. The Sentry Key Remote Entry Module (SKREEM) recognizes the key's encrypted RF signal, unlocking the doors and allowing the engine to start. If the key or SKREEM is replaced, reprogramming is required at a dealership.