×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Neon Trunk Lid Latch
Luggage Compartment Door Lock Assembly- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Trunk Lid Latches found
Dodge Neon Trunk Lid Latch
The Trunk Lid Latch of Dodge Neon cars helps in the closure of the trunk lid by properly locking it in order to prevent its opening during the car is in use. This mechanism is intended to be resistant to other forces, for example, wind and is usually made of rust-proof stainless steel. The Dodge Neon Trunk Lid Latch works in a manner of a seat belt where it has to be activated to unlock the lock for the trunk hence giving an added security measure against theft. Dodge Neon cars could have used different ways of Trunk Lid Latch in the course of the years yet the duty performed stays the same. Some of the complications that arise when your Trunk Lid Latch is faulty include the following, the trunk may open while driving and this may lead to loss of goods. Striking the right chord about reliability of the Trunk Lid Latch is the timely replacement of worn out parts so as to make sure the cover of the Dodge Neon trunk remains secure.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Neon Trunk Lid Latch at great affordable prices. Moreover, all genuine Dodge Neon Trunk Lid Latch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Neon Trunk Lid Latch Parts Questions & Experts Answers
- Q: How do you remove and install a trunk lid Latch on Dodge Neon?A: Before uninstalling the trunk lid, open it and place a cushion or cloth on the sides of the trunk compartment area. Place in a crowded area and remove wires and electrical connections that can be a hindrance when removing the object. Employ a marking pen to make alignment marks to indicate the position of the hinge on the doors. As the assistant stabilises the body weight on the lid, unscrew the hinge bolts from both sides and take off the trunk lid. To install it, follow the above listed removal procedures in reverse but be sure to make alignments on the marks you made before tightening the bolts. After installation, close the lid so to ensure that the gap is correct to the rest of the panels; for fore-and-aft adjustment, loosen the hinge bolts, reposition the lid, then tighten the bolts again. The height of the lid is also adjustable by slightly loosening the lock striker bolts, then moving the striker up or down and then tightening the bolts. To release the latch, one has to open the boot and get rid of the trim and then ease out the bolts and the latch at the same time with the electrical connections and cables. Cut the remote cable and disconnect the trunk electrical connectors from the lock but keep the lock cylinder link connected to the trunk. As for installation, it's a reversal of the above removal procedures while making sure the lock cylinder link can mesh well with the latch assembly.
