How to Replace a Blower Motor on Dodge Nitro?

Disconnect the cable from the negative terminal of the battery. Disconnect the blower motor connector. Release locking tab, then rotate and remove the motor from the housing. Detach the fan retainer clip from the motor shaft. Slip the fan off the old motor shaft, mount it on the new motor and install the retainer clip. Place the blower motor in position, and rotate it, making sure all of the locking tabs are in their slots. Reconnect the electrical connector and battery cable. Test the motor operation and make sure the air seal around the motor is not leaking.

Genuine Dodge Nitro Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motors found

View related parts
Dodge Nitro Motor-Blower With Wheel
Part Number: 68038826AA
$118.11 MSRP: $261.00
You Save: $142.89 (55%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel
- Replaced by: 68038826AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Nitro | Detonator 2WD, Detonator 4WD, Heat 2WD, Heat 4WD, SE 2WD, SE 4WD, Shock 2WD, Shock 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 6 Cyl 4.0L
View related parts
Dodge Nitro Motor-Blower With Wheel
Part Number: 68038826AB
$174.84 MSRP: $261.00
You Save: $86.16 (34%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel; Blower Motor
- Replaces: 68038826AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2011 Dodge Nitro | Detonator 2WD, Detonator 4WD, Heat 2WD, Heat 4WD, SE 2WD, SE 4WD, SXT 2WD, SXT 4WD, Shock 2WD, Shock 4WD | 6 Cyl 3.7L, 6 Cyl 4.0L
View related parts
Dodge Nitro Motor-Blower With Wheel
Part Number: 68003996AA
$162.43 MSRP: $244.00
You Save: $81.57 (34%)
ADD TO CART
Product Specifications
- Other Name: Motor Blower with Wheel; Blower Motor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Nitro | SE 2WD, SE 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 6 Cyl 4.0L

Dodge Nitro Blower Motor

The Blower Motor in Dodge Nitro cars is wear used in the heating and cooling system of the car to blasts hot or cool air to the interior cabin of the car. Its works by activating a fan that blows air in the vehicle's interior as drivers are able to control the temperature, by warming or cooling the car interior, especially after it has been left in the sun. Blower Motors of Dodge Nitro may vary in regards to its style of some models depend on some climate controls system. Some cars may employ a single blower motor while others especially large vehicles may have different motors for different functions with reference to airflow. It is however, these motor controls such as electronic control module and wiring among others that contribute to the failure of the Blower Motor block causing a compromise on the vehicle heating and air conditioning system.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Nitro Blower Motor at great affordable prices. Moreover, all genuine Dodge Nitro Blower Motor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Nitro Blower Motor Parts Questions & Experts Answers

Motor-Blower With Wheel
68038826AA
Q: How to Replace a Blower Motor on Dodge Nitro?
A: Disconnect the cable from the negative terminal of the battery. Disconnect the blower motor connector. Release locking tab, then rotate and remove the motor from the housing. Detach the fan retainer clip from the motor shaft. Slip the fan off the old motor shaft, mount it on the new motor and install the retainer clip. Place the blower motor in position, and rotate it, making sure all of the locking tabs are in their slots. Reconnect the electrical connector and battery cable. Test the motor operation and make sure the air seal around the motor is not leaking.