How to Remove the Throttle Body on a Honda Accord on Dodge Nitro?

Disconnect the cable from the negative terminal of the battery. Remove the air intake duct/resonator from the throttle body. Disconnect the electrical connectors from the throttle position sensor and idle air control valve. Label and detach all vacuum hoses from the throttle body. Detach the accelerator cable and, if equipped, the transmission control cable and cruise control cable. On 2006 and later V6 engines, there is one large electrical connector and no accelerator cable. Remove the three mounting bolts and remove the throttle body. Inspect the throttle body O-ring and replace if necessary. Install the throttle body and tighten the bolts to the torque. The remainder of installation is the reverse of removal.

Genuine Dodge Nitro Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Throttle Bodies found

View related parts
Dodge Nitro Throttle Body Etc Unit
Part Number: 4861691AA
$305.80 MSRP: $468.00
You Save: $162.20 (35%)
ADD TO CART
Product Specifications
- Other Name: T/Body; Throttle Body
- Replaces: 4861694AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Detonator 2WD, Detonator 4WD, Heat 2WD, Heat 4WD, Shock 2WD, Shock 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD | 6 Cyl 4.0L
View related parts
Dodge Nitro Throttle Body
Part Number: 4861661AB
$347.00 MSRP: $535.00
You Save: $188.00 (36%)
ADD TO CART
Product Specifications
- Replaces: 4861661AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Nitro | Heat 2WD, Heat 4WD, SE 2WD, SE 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L
View related parts
Dodge Nitro Fuel Throttle Body Injection
Part Number: 4861661AA
$349.80 MSRP: $535.00
You Save: $185.20 (35%)
ADD TO CART
Product Specifications
- Other Name: Throttle Body
- Replaced by: 4861661AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Nitro | SE 2WD, SE 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L
View related parts
Dodge Nitro Fuel Throttle Body Injection
Part Number: 68031596AA
$788.05 MSRP: $1675.00
You Save: $886.95 (53%)
ADD TO CART
Product Specifications
- Other Name: Throttle Body
- Replaced by: 68031596AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Nitro | SLT 2WD, SLT 4WD

Dodge Nitro Throttle Body

Dodge Nitro automobiles have a Throttle Body that serves to control the intake of air into the engine causing a direct impact on performance. Located between the air cleaner and intake manifold they have a precise control feature known as the butterfly valve which opens each time the accelerator pedal is pressed to allow the inflow of more air into the engine. This mechanism is supported by other sensors that report to PCM in order to manage fuel injection appropriately. Since the development of Dodge Nitro models there has been a shift from the mechanical throttle control to the Electronic Throttle Control (ETC) that provides higher sensitivity and compatibility with other systems. Whereas earlier models could have incorporated Throttle Body Injection (TBI), the current models, principally, use multi-port fuel injection systems. The Throttle Body can get worn over time or the buildup will cause lack of smooth operation, therefore it requires regular cleaning or replacement of such components as Throttle Position Sensor (TPS) and Idle Air Control (IAC) valve.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Nitro Throttle Body at great affordable prices. Moreover, all genuine Dodge Nitro Throttle Body come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Nitro Throttle Body Parts Questions & Experts Answers

Throttle Body Etc Unit
4861691AA
Q: How to Remove the Throttle Body on a Honda Accord on Dodge Nitro?
A: Disconnect the cable from the negative terminal of the battery. Remove the air intake duct/resonator from the throttle body. Disconnect the electrical connectors from the throttle position sensor and idle air control valve. Label and detach all vacuum hoses from the throttle body. Detach the accelerator cable and, if equipped, the transmission control cable and cruise control cable. On 2006 and later V6 engines, there is one large electrical connector and no accelerator cable. Remove the three mounting bolts and remove the throttle body. Inspect the throttle body O-ring and replace if necessary. Install the throttle body and tighten the bolts to the torque. The remainder of installation is the reverse of removal.