×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Ram 1500 Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
208 Brake Lines found
| Page 1 of 11 |Next >
1-20 of 208 Results
Dodge Ram 1500 Brake Line
The Brake Line in Dodge Ram 1500 vehicles is responsible for the transportation of brake fluid from the master cylinder to the brake caliper pistons in a manner that efficient hydraulic braking is made possible. Since the inception of Dodge Ram 1500, metal lines and rubber hoses have been used in the vehicles' brake system. Metal brake line tends to corrode and thus make a fluid leak and lose hydraulic pressure especially when used in winter. PVC and rubber hoses are relatively used for every day usage, but the rubber hose has problems such as crack, damage within the hose affecting its performance. To further improve its handling, it is advisable to replace steel flexible brake hoses, and replace them with rigid braided stainless steel brake lines since they will deliver a more positive feel of the brake pedal and quickens a car's response during brisk driving. If replacement is required then preformed brake line kits that are built using corrosion free material like stainless steel can be used and it also comes with easy installation compatibility with the Dodge Ram 1500.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ram 1500 Brake Line at great affordable prices. Moreover, all genuine Dodge Ram 1500 Brake Line come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Ram 1500 Brake Line Parts Questions & Experts Answers
- Q: How Should I Inspect and Replace Rubber Hoses Connecting Steel Brake Lines on Dodge Ram 1500?A: Whenever the vehicle is raised and supported securely on jackstands, inspect the rubber hoses that connect the steel brake lines with the front and rear brake assemblies for cracks, chafing of the outer cover, leaks, blisters, and other damage. These hoses are important and vulnerable parts of the brake system, so the inspection should be thorough. Use a light and mirror to assist in the check. If any hose exhibits any of the above conditions, replace it immediately. To replace the flexible hose, clean all dirt away from the hose fittings. Using a flare-nut wrench, disconnect the metal brake line from the hose fitting, being careful not to bend the frame bracket or line. If the threaded fitting is corroded, spray it with penetrating oil and allow it to soak in for about 10 minutes before trying again. If a fitting nut is frozen, do not force it as it will kink the metal line, which will then need to be replaced. Disconnect the brake hose bracket from the frame and immediately plug the metal line to prevent excessive leakage and contamination. Unscrew the banjo bolt at the caliper and remove the hose, discarding the sealing washers on either side of the fitting. Attach the new brake hose to the caliper, always using new sealing washers. Tighten the banjo bolt to the specified torque. Connect the other end of the new hose, ensuring it is not kinked or twisted. Fit the metal line to the hose or hose fitting, then tighten the hose bracket and the brake tube fitting nut securely. Check that the suspension or steering components do not make contact with the hose. Have an assistant push down on the vehicle while checking for interference with suspension operation. If replacing a front hose, have the assistant turn the steering wheel lock-to-lock while ensuring the hose does not interfere with the steering linkage or steering knuckle. After installation, bleed the brakes, check the master cylinder fluid level, and add fluid as necessary. Carefully test brake operation before returning the vehicle to normal service. When replacing brake lines, use the correct parts and avoid using copper tubing. Purchase steel brake lines from a dealer parts department or auto parts store. Prefabricated brake lines with flared tube ends and installed fittings are available. If bending a line is necessary, use a tubing bender to prevent kinking. When installing the new line, ensure it is well supported in the brackets and has sufficient clearance from moving or hot components. Tighten the fittings securely.
Related Dodge Ram 1500 Parts
Dodge Ram 1500 ABS Control Module
Dodge Ram 1500 Parking Brake Cable
Dodge Ram 1500 Speed Sensor
Dodge Ram 1500 Brake Pad
Dodge Ram 1500 Brake Proportioning Valve
Dodge Ram 1500 Brake Master Cylinder
Dodge Ram 1500 Wheel Cylinder
Dodge Ram 1500 Brake Disc
Dodge Ram 1500 Brake Bleeder Screw
Dodge Ram 1500 Brake Caliper Bracket
Dodge Ram 1500 Parking Brake Shoe