×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Ram 2500 Ball Joint
Control Arm Joint- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
15 Ball Joints found
Dodge Ram 2500 BALLJOINT-Lower Control Arm
Part Number: 5170824AD$163.54 MSRP: $248.00You Save: $84.46 (35%)
Dodge Ram 2500 BALLJOINT-Front KNUCKLE
Part Number: 5015114AA$157.16 MSRP: $206.29You Save: $49.13 (24%)
Dodge Ram 2500 BALLJOINT-Upper Control Arm
Part Number: 5174041AB$61.61 MSRP: $135.00You Save: $73.39 (55%)
Dodge Ram 2500 BALLJOINT-Lower Control Arm
Part Number: 5086980AA$98.94 MSRP: $149.00You Save: $50.06 (34%)
Dodge Ram 2500 BALLJOINT-Upper Control Arm
Part Number: 5174041AA$61.61 MSRP: $135.00You Save: $73.39 (55%)
Dodge Ram 2500 BALLJOINT-Lower Control Arm
Part Number: 5170824AA$162.06 MSRP: $248.00You Save: $85.94 (35%)Dodge Ram 2500 BALLJOINT-Lower Control Arm
Part Number: 5170824AB$162.06 MSRP: $248.00You Save: $85.94 (35%)
Dodge Ram 2500 Ball Joint Front Knuckle
Part Number: 4746696$182.74 MSRP: $273.00You Save: $90.26 (34%)
Dodge Ram 2500 BALLJOINT-Lower Control Arm
Part Number: 52037661$111.55 MSRP: $151.00You Save: $39.45 (27%)Dodge Ram 2500 BALLJOINT-Lower Control Arm
Part Number: 52037660$82.12 MSRP: $104.50You Save: $22.38 (22%)
Dodge Ram 2500 Ball Joint
Included in the suspension/steering system, Ball Joint is situated on the Dodge Ram 2500 in a way that it connects the control arms and the steering knuckles. This component enables the operation in several directional planes that enable the vehicle to respond appropriately to the surface irregularities and turning. Usually made of steel, Ball Joint has a bearing stud and socket, their surface is covered by a rubber shield to lock in dirt and retain the lubricant. Dodge Ram 2500 vehicles employ both loaded and unloaded Ball Joints, where the loaded Joint is fixed on the vehicle with the load being borne by it while the unloaded joint is situated in a fixed position without having to bear any load. There have been several types of Ball Joints where some of them are made as performance ball joints that have adjustable capabilities to suit modified suspension systems in cars. This is due to the fact that constant usage of a particular car part will lead to problems such as noise and shaft misalignment and, therefore, timely replacement is crucial to ensure that a car is safe as well as performs well on the road.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ram 2500 Ball Joint at great affordable prices. Moreover, all genuine Dodge Ram 2500 Ball Joint come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Ram 2500 Ball Joint Parts Questions & Experts Answers
- Q: How Do You Inspect the Control Arm Ball Joints on Dodge Ram 2500?A: To inspect the control arm ball joints, check for looseness whenever they are separated from the Steering Knuckle. Try turning the ball stud in its socket with your fingers. If the ball joint is loose or the ball stud can be turned, it needs to be replaced. To check the upper ball joints, raise the lower control arm with a floor jack until the tire barely touches the ground. Use a large pry bar between the upper control arm and the steering knuckle, prying upwards. Up to 0.020-inch movement is allowed, and a dial indicator can be used for precise measurement. If necessary, replace the ball joints following the specified procedures. The lower ball joints are inspected similarly but with the tire off the ground. In both cases, if replacement is needed, use the appropriate press tool and receiver cup, or take the vehicle to an automotive machine shop or a qualified repair facility for the replacement. Note that the availability of replacement parts may vary depending on the vehicle model, so check with your local auto parts store before disassembling the vehicle.
