×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Dodge Ramcharger Coolant Temperature Sensor
Coolant Water Temperature Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Coolant Temperature Sensors found
Dodge Ramcharger Sensor-COOLANT Temperature
Part Number: 56004815$35.73 MSRP: $52.60You Save: $16.87 (33%)
Dodge Ramcharger Sensor-COOLANT Temperature
Part Number: 4720314$133.30 MSRP: $200.00You Save: $66.70 (34%)
Dodge Ramcharger Sensor-Temperature Sending Unit
Part Number: 56027011$49.49 MSRP: $72.65You Save: $23.16 (32%)
Dodge Ramcharger Sensor-COOLANT Temperature
Part Number: 5226374$74.84 MSRP: $111.00You Save: $36.16 (33%)
Dodge Ramcharger Sensor-TEMP. Gage - As PURCH.
Part Number: 4504201$33.59 MSRP: $42.74You Save: $9.15 (22%)
Dodge Ramcharger Sensor COOLANT Duel THERM
Part Number: 5226356$24.37 MSRP: $31.01You Save: $6.64 (22%)
Dodge Ramcharger Coolant Temperature Sensor
The Coolant Temperature Sensor in Dodge Ramcharger automobiles is an important one as it regulates temperature of the coolant with a purpose to sustain proper running of the engine. Through proper monitoring of the temperature of the coolant, the Coolant Temperature Sensor assist in improvement of the efficiency of the vehicle's engine. There are different generations of the Coolant Temperature Sensors which where used throughout the years on Dodge Ramcharger models, although the roles of these sensors are the same throughout the years, it is possible that the design or technology behind them has changed. Such differentiation may lead to the difference in responsiveness or accuracy of those parts affecting overall engine management. The successful use of Coolant Temperature Sensor plays a critical role in the durability of the Dodadge Ramcharger vehicle specifically in terms of the engine.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ramcharger Coolant Temperature Sensor at great affordable prices. Moreover, all genuine Dodge Ramcharger Coolant Temperature Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Ramcharger Coolant Temperature Sensor Parts Questions & Experts Answers
- Q: How to check and replace Coolant Temperature Sensor on Dodge Ramcharger?A: The coolant temperature indicating system consists of a sending unit which is screwed into the cylinder head or manifold and a corresponding temperature gauge mounted in the instrument panel. When the coolant temperature of the engine is low the resistance of the sending unit is high and restricts the flow of current to the gauge. This causes the pointer to move only a short distance. As the temperature of the coolant increases, the resistance at the sending unit decreases and causes an increased flow of current and movement at the gauge. Do not apply 12 volt current directly to the temperature sender terminal at any time, as the voltage will damage the unit. Start the engine and allow it to run with a thermometer placed in the radiator neck until a minimum temperature of 180°F is read. The gauge in the instrument panel should indicate within the normal band of the reading scale. If the gauge does not indicate correctly, disconnect the gauge lead from the terminal at the sender unit. Connect the lead of a 12-volt test light or the positive lead of a voltmeter to the gauge lead that was disconnected. Connect the other test lead to an engine ground. With the ignition switch set to the On or Accessory position, a flashing light or fluctuating voltage should indicate that the instrument voltage regulator is operating and the gauge circuit is not grounded. If the light stays on or the voltage reading is steady, the instrument voltage regulator is bad. If no voltage is indicated by the voltmeter or test light, check for an open circuit in the system. If all of the above readings check out correctly yet the gauge does not work properly, the gauge sender needs replacement. The engine must be completely cool when this procedure is performed. Disconnect the wire from the unit. Use a wrench to remove the old unit and immediately install the new one. Because the unit threads into a coolant passage, there will be some coolant spillage. Check the level after the replacement has been installed.
Related Dodge Ramcharger Parts
Browse by Year
1993 Coolant Temperature Sensor 1992 Coolant Temperature Sensor 1991 Coolant Temperature Sensor 1990 Coolant Temperature Sensor 1989 Coolant Temperature Sensor 1988 Coolant Temperature Sensor 1987 Coolant Temperature Sensor 1986 Coolant Temperature Sensor 1985 Coolant Temperature Sensor 1984 Coolant Temperature Sensor