Where is the Engine Coolant Temperature Sensor Located on Jeep Liberty?

The engine coolant temperature sensor is a thermistor mounted into an engine water jacket. The change in resistance values directly affects the voltage signal from the sensor to the PCM. As the sensor temperature increases, resistance values decrease, and as the sensor temperature decreases, resistance values increase. On 2.4L four-cylinder engines, the sensor is located on the left side of the front of the cylinder head. On 3.7L V6 engines, the sensor is located on the front of the intake manifold, behind the alternator. To replace the sensor, partially drain the cooling system, disconnect the electrical connector, and unscrew the sensor. Before installing the new sensor, wrap the threads with Teflon sealing tape to prevent leakage and thread corrosion. Installation is the reverse of removal. Finally, refill the cooling system.

Genuine Jeep Liberty Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coolant Temperature Sensors found

View related parts
Jeep Liberty Sensor-COOLANT Temperature
Part Number: 56027873
$70.01 MSRP: $107.00
You Save: $36.99 (35%)
ADD TO CART
Product Specifications
- Other Name: Sensor Coolant Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2007 Jeep Liberty | Limited Edition 2WD, Limited Edition 4WD, Renegade 2WD, Renegade 4WD, Sport 2WD, Sport 4WD | 4 Cyl 2.4L, 6 Cyl 3.7L
View related parts
Jeep Liberty Sensor-Fluid Temperature
Part Number: 5149077AB
$44.07 MSRP: $65.85
You Save: $21.78 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Fluid Temperature
- Replaces: 5149096AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Limited Edition 2WD, Limited Edition 4WD, Limited JET Edition 2WD, Limited JET Edition 4WD, Renegade 4WD, Sport 2WD, Sport 4WD | 6 Cyl 3.7L
View related parts
Jeep Liberty Sensor-COOLANT Temperature
Part Number: 5066779AA
$67.12 MSRP: $101.00
You Save: $33.88 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Coolant Temperature; Coolant Temperature Sensor, Temperature Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty
- 2002-2006 Jeep Liberty | Limited Edition 4WD, Sport 2WD, Sport 4WD | 4 Cyl 2.8L Diesel
View related parts
Jeep Liberty COOLANT Temperature
Part Number: 5149096AB
$44.07 MSRP: $65.85
You Save: $21.78 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Coolant Temperature
- Replaced by: 5149077AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2012 Jeep Liberty | Limited Edition 2WD, Limited Edition 4WD, Limited JET Edition 2WD, Limited JET Edition 4WD, Renegade 4WD, Sport 2WD, Sport 4WD | 6 Cyl 3.7L

Jeep Liberty Coolant Temperature Sensor

The Coolant Temperature Sensor in Jeep Liberty vehicles is one of the important parts which helps to sense the coolant temperature to maintain the optimum temperature required for the engine. Through the accurate measurement of the temperature the Coolant Temperature Sensor plays a role in the efficiency and performance of the engine. Concerning the usage differences based on Jeep Liberty model, it is possible that in the course of the years certain versions or type/ style of Coolant Temperature Sensors may have been used although the difference in the models is not elaborated. The primary purpose remains similar to all these types and its main task is to measure the temperature of the coolant for supporting engines' managing systems.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Liberty Coolant Temperature Sensor at great affordable prices. Moreover, all genuine Jeep Liberty Coolant Temperature Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Liberty Coolant Temperature Sensor Parts Questions & Experts Answers

COOLANT Temperature
5149096AB
Q: Where is the Engine Coolant Temperature Sensor Located on Jeep Liberty?
A: The engine coolant temperature sensor is a thermistor mounted into an engine water jacket. The change in resistance values directly affects the voltage signal from the sensor to the PCM. As the sensor temperature increases, resistance values decrease, and as the sensor temperature decreases, resistance values increase. On 2.4L four-cylinder engines, the sensor is located on the left side of the front of the cylinder head. On 3.7L V6 engines, the sensor is located on the front of the intake manifold, behind the alternator. To replace the sensor, partially drain the cooling system, disconnect the electrical connector, and unscrew the sensor. Before installing the new sensor, wrap the threads with Teflon sealing tape to prevent leakage and thread corrosion. Installation is the reverse of removal. Finally, refill the cooling system.