How to Remove and Install a Starter?

Disconnect the cable from the negative terminal of the battery. Remove the air filter housing and intake duct. Remove the throttle body. Remove the starter mounting bolts. Push the starter under the intake manifold, position the starter to face the nose downward, then pull the starter up and out enough to access the electrical connections. Disconnect the starter wiring and remove the starter. Installation is the reverse of removal. Tighten the starter mounting bolts to the torque.

Genuine Jeep Patriot Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Starter motors found

View related parts
Jeep Patriot Engine Starter
Part Number: 5034555AA
$251.92 MSRP: $378.00
You Save: $126.08 (34%)
ADD TO CART
Product Specifications
- Other Name: Starter-Engine; Starter
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | Base 4WD, Base FWD, Latitude 4WD, Latitude FWD, Latitude X 4WD, Latitude X FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Jeep Patriot Engine Starter
Part Number: R5034555AA
$145.75 MSRP: $172.00
You Save: $26.25 (16%)
ADD TO CART
Product Specifications
- Other Name: Starter-Engine; Starter
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | Base 4WD, Base FWD, Latitude 4WD, Latitude FWD, Latitude X 4WD, Latitude X FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Jeep Patriot Engine Starter
Part Number: 4801830AC
$222.68 MSRP: $336.00
You Save: $113.32 (34%)
ADD TO CART
Product Specifications
- Other Name: Starter-Engine
- Replaces: RL801830AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2014 Jeep Patriot | Base FWD, Latitude FWD, Sport FWD
View related parts
Jeep Patriot Engine Starter
Part Number: RL801830AC
$222.68 MSRP: $336.00
You Save: $113.32 (34%)
ADD TO CART
Product Specifications
- Other Name: Starter-Engine
- Replaced by: 4801830AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013 Jeep Patriot | Latitude FWD, Sport FWD
- 2010 Jeep Patriot | Base FWD, Sport FWD
View related parts
Jeep Patriot Engine Starter
Part Number: 5033440AA
$227.57 MSRP: $337.00
You Save: $109.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Starter-Engine
- Replaced by: 5033440AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Jeep Patriot | Base FWD
View related parts
Jeep Patriot Engine Starter
Part Number: 5033440AC
$259.35 MSRP: $337.00
You Save: $77.65 (24%)
ADD TO CART
Product Specifications
- Other Name: Starter-Engine
- Replaces: 5033440AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Jeep Patriot | Base FWD, Limited FWD
View related parts
Jeep Patriot Starter Motor
Part Number: RX033440AC
$145.84 MSRP: $212.00
You Save: $66.16 (32%)
ADD TO CART
Product Specifications
- Other Name: Starter-Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Jeep Patriot | Base FWD, Limited FWD

Jeep Patriot Starter Motor Parts Questions & Experts Answers

Engine Starter
5034555AA
Q: How to Remove and Install a Starter?
A: Disconnect the cable from the negative terminal of the battery. Remove the air filter housing and intake duct. Remove the throttle body. Remove the starter mounting bolts. Push the starter under the intake manifold, position the starter to face the nose downward, then pull the starter up and out enough to access the electrical connections. Disconnect the starter wiring and remove the starter. Installation is the reverse of removal. Tighten the starter mounting bolts to the torque.