How to Replace the Brake Pad on Jeep Wagoneer?

When servicing the disc brakes, it is important to use only high quality, nationally recognized name brand pads. To begin, remove the cover from the brake fluid reservoir. Then, loosen the wheel lug nuts and raise the front of the vehicle, securely supporting it on jackstands. Remove the front wheels and work on one brake assembly at a time, using the assembled brake for reference if necessary. Carefully inspect the brake disc and if machining is necessary, follow the information provided to remove the disc and the pads from the calipers. Next, push the piston back into the bore to create space for the new brake pads. This can be done using a C-clamp, ensuring that one end of the clamp is on the flat area on the backside of the caliper and the other end is pressing against the outer brake pad. As the piston is depressed, be mindful of the fluid in the master cylinder to prevent overflow. If needed, siphon off some of the fluid. Before removing the caliper, clean off all brake dust with brake system cleaner. For 1995 and later models, follow the specific pad replacement procedure. When reinstalling the caliper, tighten the mounting pins to the specified torque. Once the job is complete, firmly depress the brake pedal a few times to bring the pads into contact with the disc. Finally, check for fluid leakage and ensure that the brakes are operating normally before driving in traffic.

Genuine Jeep Wagoneer Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Pads found

View related parts
Jeep Wagoneer PAD-REAR DISC BRAKE
Part Number: 68564742AA
$220.17 MSRP: $332.00
You Save: $111.83 (34%)
ADD TO CART
Product Specifications
- Other Name: Brake Pad, Rear Pad
- Position: Rear
- Replaces: 68527087AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2024 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Front Disc Brake
Part Number: 68520814AC
$250.80 MSRP: $384.00
You Save: $133.20 (35%)
ADD TO CART
Product Specifications
- Other Name: Brake Pad, Front Pad
- Position: Front
- Replaces: 68520814AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2024 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Brake Pad Kit
Part Number: V2012606AB
$48.50 MSRP: $72.20
You Save: $23.70 (33%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Brake ; Shoe And Lining Package
- Replaced by: 2AMV2606AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990 Jeep Wagoneer | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 4.0L
View related parts
Jeep Wagoneer PAD KIT-FRONT DISC BRAKE
Part Number: 68564743AA
$174.41 MSRP: $265.00
You Save: $90.59 (35%)
ADD TO CART
Product Specifications
- Other Name: Brake Pad, Front Pad
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2024 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Disc Pkg-Front Brake
Part Number: BHKH5552
$15.92 MSRP: $20.25
You Save: $4.33 (22%)
ADD TO CART
Product Specifications
- Other Name: Pad Package, Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1990 Jeep Wagoneer | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.0L, 6 Cyl 4.2L
View related parts
Jeep Wagoneer Brake Pad Package
Part Number: V3010058
Product Specifications
- Other Name: Pads-Brake Pads ; Pad Package, Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Jeep Wagoneer | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 4.0L, 6 Cyl 4.2L
View related parts
Jeep Wagoneer Pad Kit Front Wheel Disc Brake
Part Number: V1011613
Product Specifications
- Other Name: Pad Package, Brake
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Jeep Wagoneer | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 4.0L, 6 Cyl 4.2L

Jeep Wagoneer Brake Pad

Brake Pad in Jeep Wagoneer cars are required parts of the braking system of the car that is used to halt the automobile by rubbing against the rotating brake disks. These pads are manufactured using very resistant materials that make them resistant to temperature, and that normally get to about 400 degrees Fahrenheit. A brake pad comprises of steel backing plates and friction material which transfers to the rotor to produce the needed friction to enable for braking. Different types of brake pad include non-metallic, semi metallic, fully metallic and ceramic brake pads where each of the brake has got its own characters to suit a certain driving condition. Keeping and replacing brake pad regularly is important; however, wear indicators are in a position to remind the driver when the pad requires replacement. Besides meeting the needed specifications, the proper selection of brake pads guarantees effective and smooth braking with few of the drawbacks such as brake fade or excessive rotor wear.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Wagoneer Brake Pad at great affordable prices. Moreover, all genuine Jeep Wagoneer Brake Pad come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Wagoneer Brake Pad Parts Questions & Experts Answers

Brake Pad Package
V3010058
Q: How to Replace the Brake Pad on Jeep Wagoneer?
A: When servicing the disc brakes, it is important to use only high quality, nationally recognized name brand pads. To begin, remove the cover from the brake fluid reservoir. Then, loosen the wheel lug nuts and raise the front of the vehicle, securely supporting it on jackstands. Remove the front wheels and work on one brake assembly at a time, using the assembled brake for reference if necessary. Carefully inspect the Brake Disc and if machining is necessary, follow the information provided to remove the disc and the pads from the calipers. Next, push the piston back into the bore to create space for the new brake pads. This can be done using a C-clamp, ensuring that one end of the clamp is on the flat area on the backside of the caliper and the other end is pressing against the outer brake pad. As the piston is depressed, be mindful of the fluid in the master cylinder to prevent overflow. If needed, siphon off some of the fluid. Before removing the caliper, clean off all brake dust with brake system cleaner. For 1995 and later models, follow the specific pad replacement procedure. When reinstalling the caliper, tighten the mounting pins to the specified torque. Once the job is complete, firmly depress the brake pedal a few times to bring the pads into contact with the disc. Finally, check for fluid leakage and ensure that the brakes are operating normally before driving in traffic.