×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Ram 1500 Oil Cooler
Engine Oil Cooler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 Oil Coolers found
Ram 1500 Engine Oil Filter Adapter
Part Number: 68365925AA$190.50 MSRP: $250.00You Save: $59.50 (24%)
Ram 1500 Engine Oil Filter Adapter
Part Number: 68365931AA$163.83 MSRP: $217.00You Save: $53.17 (25%)
Ram 1500 ADAPTER-ENGINE OIL FILTER
Part Number: 68596318AB$144.17 MSRP: $217.00You Save: $72.83 (34%)
Ram 1500 Adapter-Engine Oil Filter
Part Number: 68511102AA$334.40 MSRP: $510.00You Save: $175.60 (35%)
Ram 1500 Oil Cooler
This is equally important since viscosity of the engine oil reduces with increase in temperature and therefore must be regulated through the Oil Cooler on Ram 1500 vehicles. The Oil Cooler employs an oil-to-water cooling system as part of the vehicles' cooling network to make sure that the oil warms up to the correct temperature fast and to subdue heat levels within it that can degrade the oil. Different types of Oil Coolers have been used on Ram 1500 models over hundreds of years, with much having gone into increasing cooling capacities as well as when the vehicle is under pressure like during towing. However, those that are installed in factories may sometimes be deficient and therefore may not reach these levels of performance especially during emergent circumstances such as clogging or corrosion. When it comes to problems with the factory equipped cooler or no cooler installed at all, kits exist to maintain proper oil temperatures as well as increase the life span of the oil and engine of Ram 1500 automobiles.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 1500 Oil Cooler at great affordable prices. Moreover, all genuine Ram 1500 Oil Cooler come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Ram 1500 Oil Cooler Parts Questions & Experts Answers
- Q: How to replace the oil cooler in a fuel system on Ram 1500?A: Relieve the fuel system pressure, then disconnect the cable from the negative terminal of the battery. Drain the coolant. Remove the lower intake manifold. Remove the oil cooler mounting fasteners, including the mounting screws and bolts. Remove the oil cooler and discard the seals. Install new O-ring seals to the oil cooler. Do not lubricate the O-ring seals, install them dry. Place the oil cooler onto the block and install the two mounting screws. Install the mounting bolts and tighten the screws and bolts to the torque. The remainder of installation is the reverse of removal. Change the engine oil and filter and refill the cooling system. Run the engine until normal operating temperature is reached, and check for leaks.
