How to Remove a Power Steering Pump on Ram 1500?

Disconnect the cable(s) from the negative battery terminal(s). Remove the drivebelt. Using a large syringe or suction gun, suck as much fluid out of the power steering fluid reservoir. Position a drain pan under the power steering pump, then disconnect the hoses from the pump. Plug the hoses to prevent excessive fluid loss and the entry of contaminants. Remove any interfering engine components. Remove the pump mounting bolts. The bolts can be accessed through the holes in the power steering pump pulley. Lift the pump from the engine compartment, being careful not to let any power steering fluid drip on the vehicle's paint. Installation is the reverse of removal. Tighten all fasteners securely. Fill the power steering reservoir with the recommended fluid, then bleed the system. Re-check the power steering fluid level.

Genuine Ram 1500 Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Power Steering Pumps found

View related parts
Ram 1500 Power Steering Pump
Part Number: 68069904AC
$515.72 MSRP: $752.00
You Save: $236.28 (32%)
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering
- Replaces: 68069904AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ram 1500 | SLT Crew Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD | 8 Cyl 4.7L
View related parts
Ram 1500 Power Steering Pump
Part Number: 68069904AB
$337.12 MSRP: $752.00
You Save: $414.88 (56%)
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering
- Replaced by: 68069904AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Ram 1500 | SLT Crew Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD | 8 Cyl 4.7L
View related parts
Ram 1500 Power Steering Pump
Part Number: 68069903AB
$561.32 MSRP: $819.00
You Save: $257.68 (32%)
ADD TO CART
Product Specifications
- Other Name: Pump-Power Steering
- Replaced by: 68069903AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Ram 1500 | Laramie Crew Cab 4WD, Laramie Quad Cab 4WD, Longhorn Crew Cab 4WD, SLT Crew Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, Sport Crew CAB 4WD, Sport Quad Cab 4WD, Sport Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD | 8 Cyl 5.7L
View related parts
Ram 1500 Power Steering Pump
Part Number: R8069903AC
Product Specifications
- Other Name: Pump-Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ram 1500 | Laramie Crew Cab 4WD, Laramie Quad Cab 4WD, Longhorn Crew Cab 4WD, SLT Crew Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, Sport Crew CAB 4WD, Sport Quad Cab 4WD, Sport Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD | 8 Cyl 5.7L
View related parts
Ram 1500 Power Steering Pump
Part Number: 68069903AC
Product Specifications
- Other Name: Pump-Power Steering
- Replaces: 68069903AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ram 1500 | Laramie Crew Cab 4WD, Laramie Quad Cab 4WD, Longhorn Crew Cab 4WD, SLT Crew Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD, Sport Crew CAB 4WD, Sport Quad Cab 4WD, Sport Regular Cab 4WD | 8 Cyl 5.7L
View related parts
Ram 1500 Power Steering Pump
Part Number: R8069904AC
Product Specifications
- Other Name: Pump-Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ram 1500 | SLT Crew Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, ST Crew Cab 4WD, ST Quad Cab 4WD, ST Regular Cab 4WD | 8 Cyl 4.7L

Ram 1500 Power Steering Pump

The Power Steering Pump in Ram 1500 vehicles therefore serves to generate hydraulic power from engine energy to enable easy steering. It works by producing water pressure which eases the driver in maneuvering the steering even at slow movement or even when the car is stationary. the pump is installed to be driven by the engine crankshaft normally with a v-belt or serpentine belt with the forced oil cooler tank situated locally or as a part of the oil tank. Hydraulic power steering is the first known Ram 1500 power steering system over the decades of use of power steering system in Ram 1500. Hydraulic systems keep a one-to-one linkage so that using the emergency steering should the power steering system fail, traditional hand cranking is possible. On the other hand, electronic systems of the assistance can control the level of support depending upon vehicles' speed and therefore improve it for various roads' requirements. Problems associated with the Ram 1500 Power Steering Pump mostly includes leakage and noises and therefore requires repair or replacement so as to enjoy the premier in steering.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 1500 Power Steering Pump at great affordable prices. Moreover, all genuine Ram 1500 Power Steering Pump come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Ram 1500 Power Steering Pump Parts Questions & Experts Answers

Power Steering Pump
68069904AB
Q: How to Remove a Power Steering Pump on Ram 1500?
A: Disconnect the cable(s) from the negative battery terminal(s). Remove the drivebelt. Using a large syringe or suction gun, suck as much fluid out of the power steering fluid reservoir. Position a drain pan under the power steering pump, then disconnect the hoses from the pump. Plug the hoses to prevent excessive fluid loss and the entry of contaminants. Remove any interfering engine components. Remove the pump mounting bolts. The bolts can be accessed through the holes in the power steering pump pulley. Lift the pump from the engine compartment, being careful not to let any power steering fluid drip on the vehicle's paint. Installation is the reverse of removal. Tighten all fasteners securely. Fill the power steering reservoir with the recommended fluid, then bleed the system. Re-check the power steering fluid level.

Related Ram 1500 Parts

Browse by Year

2012 Power Steering Pump 2011 Power Steering Pump