×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Ram 3500 Brake Disc
Disc Rotor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Brake Discs found
Ram 3500 Brake Disc
Also known as Drums, the Brake Disc in Ram 3500 vehicles is used to offer the much-needed friction interface of brake pad in an application to slow or gradually halt the particular vehicle. Akin to the wheel, the rotor is placed on the axle or hub but unlike the stationary brake drum, this one revolves with the wheel; pressure from the caliper compresses the pads against the rotating rotor. This design enables for dispersing the heat created and more so in a vented rotors that have advanced like cooling fins. For Brake Discs, Ram 3500 vehicles have used both the solid and vented types of Brake Discs since the development of the vehicles. Where as, solid rotors are used in smaller cars, which does not fall under the performance category and vented rotors are more useful in performance cars as they are effective in cooling the rotors during high use. There are mostly composed of cast iron but could be combined with some types of composite materials.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 3500 Brake Disc at great affordable prices. Moreover, all genuine Ram 3500 Brake Disc come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Ram 3500 Brake Disc Parts Questions & Experts Answers
- Q: How to Inspect the Brake Disc on Ram 3500?A: To inspect the brakes, start by loosening the wheel lug nuts and raising the vehicle on jackstands. Apply the parking brake and remove the wheels. Visually inspect the disc surface for score marks and other damage. Deep grooves require disc removal and refinishing. Check both sides of the disc. To check disc runout, place a dial indicator about 1/2-inch from the outer edge of the disc. Set the indicator to zero and turn the disc. The indicator reading should not exceed the runout limit. If it does, the disc should be refinished. Check the disc thickness with a micrometer. To remove the disc, remove the Brake Caliper and hang it out of the way. Remove the caliper mounting bracket and, if equipped, the hub extender. Remove the lug nuts and pull the disc off the hub. If removing a rear disc on a model with dual rear wheels, remove the rear axleshaft and hub and bearing assembly, then unbolt the disc from the hub. Installation is the reverse of removal. Tighten the disc-to-hub bolts securely. Lower the vehicle and tighten the wheel lug nuts to the specified torque.
