×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Ram 3500 Oil Pump
Oil Fluid Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 Oil Pumps found
Ram 3500 Oil Pump
The Oil Pump in Ram 3500 vehicles are one of the most important for the work of the internal combustion engine, through which the circulation of oil under pressure is maintained for lubrication and cooling of critical parts of the engine such as bearings and pistons. This system usually incorporates mechanical pumps whose operation is made possible by the crank shaft or the cam shaft, these are preferred for their reliability. Different sorts of the Oil Pumps, that is, gear, trochoid, and vane pumps could be installed to the Ram 3500 vehicles of various years. It's main use is to pump oil from the sump, and then filter the oil before circulating it to the various parts of the engine in order to maintain vital oil pressures for operation. They also said that there is need to have regular services like the oil change and the filter which are crucial to try and avoid cases of blocks in the system as well as extending the engine of the Ram 3500.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 3500 Oil Pump at great affordable prices. Moreover, all genuine Ram 3500 Oil Pump come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Ram 3500 Oil Pump Parts Questions & Experts Answers
- Q: How to disconnect and remove the oil pump assembly in diesel engine on Ram 3500?A: Disconnect the cables from the negative terminals of the batteries. Remove the gear housing cover. Measure the backlash between the gears using a dial indicator. Install the dial indicator tip against one of the teeth on the idler gear and twist the idler gear back and forth. Place the dial indicator tip on the oil pump drive gear and check the backlash between it and the idler gear while securely holding the idler gear from moving. Remove the four mounting bolts and remove the oil pump assembly from the gear case. Remove the back plate of the oil pump assembly. Clean the top of the gerotor planetary of oil and use a felt pen or paint to mark it with the word TOP. Remove the components, clean them with solvent and dry them thoroughly. Assemble the components back in the oil pump housing. If any clearance is beyond that, replace the oil pump assembly. If the original pump is being reused, fill the pump cavity with engine oil and reinstall the back cover, then install the pump assembly in the gear case and tighten the mounting bolts to the torque. The remainder of installation is the reverse of removal. Refill the crankcase with oil, start the engine, and check for leaks and proper oil pressure.
