Make sure this part fits

Chrysler 5006112AA Axle-Rear

2001-2004 Chrysler 5006112AA

Customer Questions & Expert Answers (10)
Mopar 5006112AA Axle-Rear
  • Part Description
    Axle Rear
  • Position
    Rear
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number5006112AA
    Part DescriptionAxle Rear
    Item Dimensions65.5 x 9.0 x 7.4 inches
    Item Weight44.00 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU5006112AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2001-2004 Chrysler Town & Country6 Cyl 3.3L, 6 Cyl 3.5L, 6 Cyl 3.8LBase, EL, EX, Limited FWD, LX FWD, LXi FWD, Touring FWD
    2001-2003 Chrysler Voyager4 Cyl 2.4L, 6 Cyl 3.3LBase, EC, LX
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5006112AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do with the lower leaf spring isolator for the 2007 Chrysler Town & Country? Posted by Customer
    A:
    Place the lower leaf spring isolator in the correct position on the axle.
    Posted by MoparPartsGiant Specialist
    Q:
    How is power transmitted from the transaxle to the wheels in the 2006 Chrysler Town & Country? Posted by Customer
    A:
    Power is transmitted from the transaxle to the wheels through a pair of driveaxles.
    Posted by MoparPartsGiant Specialist
    Q:
    How should you support the 2004 Chrysler Town & Country? Posted by Customer
    A:
    Raise the vehicle and securely support it on jackstands.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should you install the drive axle for the 2004 Dodge Caravan? Posted by Customer
    A:
    Thoroughly clean the splines and bearing shield on the outer CV joint and the wheel bearing area of the steering knuckle. Thoroughly clean the splines and oil seal sealing surface on the inner CV joint and apply an even bead of multi-purpose grease around the oil seal sealing surface. When installing the drive axle, push it sharply in to seat the snap ring on the inner CV joint stub shaft into its groove in the differential gears inside the transaxle. Pull out on the inner CV joint housing to ensure it's seated.
    Posted by MoparPartsGiant Specialist
    Q:
    What other component should you disconnect from the rear axle for the 2007 Dodge Caravan? Posted by Customer
    A:
    Remove the track bar-to-axle bolt and nut.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How can you check for wear in the CV joints and driveaxle shafts for the 2007 Dodge Caravan? Posted by Customer
    A:
    To check for wear, grasp each axle and rotate it in both directions while holding the CV joint housings, feeling for play indicating worn splines or sloppy CV joints. Additionally, inspect the axleshafts for cracks, dents, and distortion.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the lower end of the track bar be supported for the 1989 Dodge Grand Caravan? Posted by Customer
    A:
    Support the lower end of the track bar with a piece of sturdy wire.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    Are there any specific considerations for the 2012 Dodge Grand Caravan equipped with 3.3L or 3.8L engines regarding driveaxles? Posted by Customer
    A:
    Yes, 1991 and 1992 models with 3.3L or 3.8L engines utilize equal-length driveaxles. In this configuration, the right driveaxle's inner end connects to an intermediate shaft supported by a bearing and bracket. The inner end of the intermediate shaft is then linked to the differential side gear through a Cardan-type joint.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the wheel cover, front hub nut cotter pin, nut lock, and wave washer for the 1987 Dodge Grand Caravan? Posted by Customer
    A:
    Loosen the hub nut with the weight of the vehicle on the wheels.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5006112AA, the Right Choice

To ensure reliability, purchase Mopar part # 5006112AA Axle-Rear. It is sometimes referred to as Chrysler Axle Shaft. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Town & Country, Voyager models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5006112AA Axle-Rear. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly