Chrysler BAUNV75450 Battery-Storage

You can Select Your Vehicle to check if BAUNV75450 fits your vehicle.

Remove the battery from the vehicle and check the electrolyte level. Install bolts in the terminals for side-mounted batteries. Connect the battery charger leads to the battery posts, ensuring positive to positive and negative to negative. Set the charger to 12 volts and use a timer if necessary. Monitor the battery for overheating if using a charger with a rate higher than two amps. If using a trickle charger, let the battery charge overnight after regular checks. Measure the specific gravity with a hydrometer during the last few hours of charging for batteries with removable cell caps. Sealed batteries may have built-in hydrometers that indicate the state of charge by color. Use a voltmeter to check the charge of sealed batteries without built-in hydrometers. A fully charged battery should read approximately 12.6 volts or higher.

The first step is to disconnect the negative battery cable from the ground stud on the left shock tower.

Disconnect the negative battery cable first, followed by the positive cable, to avoid shorting the battery.