Chrysler 4593684AA Belt-SERPENTINE

You can Select Your Vehicle to check if 4593684AA fits your vehicle.

The drive belt drives all accessory components and needs regular inspection. The belt tension is auto-adjusted and wear indicator marks on the tensioner indicate if replacement is needed. To replace, remove the air inlet tube, relieve tension, remove the belt, and install a new one.

To begin with, drive belts are vital for vehicle operation. Four-cylinder engines have two belts, one for the alternator and air conditioning compressor, and another for the power steering pump, while V6 engines use a single serpentine belt. Check for cracks, fraying, and glazing, and ensure even ribs. Adjustments can be made by loosening the power steering pump mounting bolt and nut.

Drivebelts, or V-belts, at the engine front, are essential for vehicle function and require regular inspection and adjustment. The number of belts depends on installed accessories like the alternator, power steering pump, water pump, and air conditioning compressor. Some engines use a serpentine belt with a tensioner, requiring no adjustment. To inspect, and check belts for cracks, separation, contamination, and glazing. Adjust belt tension by moving the belt-driven accessory on the bracket after loosening the locking bolt and pivot bolt. When adjusting the alternator drivebelt, loosen the pivot nut, locking bolt, or T-bolt locknut, and turn the adjusting bolt.

Drive belts, or V-belts, at the engine front, are vital for engine and accessory function. Check belts for cracks, separation, fraying, and glazing, and pulleys for nicks, cracks, distortion, and corrosion. Belt tension can be checked by pushing it halfway between the pulleys. If needed, adjust by moving the belt-driven accessory. On newer models, a tensioner automatically maintains belt tension. To replace a belt, follow adjustment procedures and ensure correct routing.

The drive belt plays a crucial role in the operation of the vehicle and its components.

The drive belts are located at the front of the engine and are important for the vehicle's operation. They are prone to wear and should be inspected regularly to prevent damage. Four-cylinder engine models have two belts, while V6 engines use a single serpentine belt for all components.

The drive belt plays a crucial role in the operation of the vehicle and its components.

Once all screws and fasteners have been removed, detach the splash shield.

The drive belt is prone to failure over time due to its function and material makeup.