Chrysler 4616749 Bushing-Shock Absorber

You can Select Your Vehicle to check if 4616749 fits your vehicle.

To disassemble the shock absorber assembly, start by removing it and reinstalling the clevis bracket. Clamp the shock absorber in a vise and compress the coil spring. Remove the damper rod nut, washer, upper control arm mounting bracket, and isolator bushings. Take off the upper and lower isolator bushings, sleeve, and upper spring isolator. Remove the washer, dust shield, compressed coil spring, jounce bumper, and sleeve. Inspect the shock absorber for rod binding and check the shock mount, upper spring seat/isolator, and coil spring for any damage. To assemble, reverse the steps. Install the sleeve on the shock absorber rod with the undercut side facing downward. Reinstall the top and bottom shock absorber rod bushings. Finally, install the shock absorber/coil spring assembly.

Check for leaking fluid, dents, cracks, and other damage. Also, check the coil spring for chips or cracks and inspect the spring seat, rubber isolators, bushings, dust shield, and jounce bumper for any deterioration. Replace any components as necessary.

Check for leaking fluid, dents, cracks, and other obvious damage. Also, check the coil spring for chips and corrosion. Replace any damaged components.