Make sure this part fits

Chrysler 4781013AA Engine Camshaft

2001-2007 Chrysler 4781013AA

Customer Questions & Expert Answers (10)
Mopar 4781013AA Engine Camshaft
  • Part Description
    Camshaft-Engine
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4781013AA
    Part DescriptionCamshaft-Engine
    Other NamesCamshaft
    Item Weight6.90 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4781013AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2001-2007 Chrysler Town & Country6 Cyl 3.3LBase, EL, Limited FWD, LX FWD, LXi FWD
    2001-2003 Chrysler Voyager6 Cyl 3.3LBase, LX
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4781013AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if cam lobe wear exceeds the specified limit for the 1989 Dodge Grand Caravan? Posted by Customer
    A:
    If the wear on the cam lobes exceeds the specified limit, the camshaft should be replaced.
    Posted by MoparPartsGiant Specialist
    Q:
    What maintenance should be performed on the camshaft(s) and cylinder head for the 2007 Chrysler Town & Country? Posted by Customer
    A:
    Clean the camshaft(s) and gasket surface, inspect for wear or damage, and measure the camshaft bearing journal diameters and bearing surfaces for scoring. Replace any worn components and clean the cylinder head, ideally by a qualified automotive machine shop.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What measurements should be recorded during inspection for the 2005 Chrysler Town & Country? Posted by Customer
    A:
    Measure the lobe height of each cam lobe on the intake camshaft, recording measurements to identify excessive variations; repeat for the exhaust camshaft, ensuring not to mix intake and exhaust measurements.
    Posted by MoparPartsGiant Specialist
    Q:
    What is required for camshaft bearing replacement for the 2004 Dodge Caravan? Posted by Customer
    A:
    Camshaft bearing replacement requires special tools and expertise, so if the procedure is beyond your ability, consider taking the engine block to an automotive machine shop.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done during the installation of the camshafts for the 2006 Dodge Caravan? Posted by Customer
    A:
    Place the valve lash adjusters and rocker arms, clean and lubricate the camshaft and bearing journals, and carefully install the camshafts in their original location, aligning timing marks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How is the camshaft supported for the 2006 Dodge Grand Caravan? Posted by Customer
    A:
    The camshaft is supported by five bearing caps, each secured by two fasteners, numbered from 1 to 5 starting at the drivebelt end of the engine. If the caps are not numbered, mark them to ensure correct reinstallation.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be used to lubricate the camshaft bearing journals and cam lobes for the 1989 Dodge Grand Caravan? Posted by Customer
    A:
    Molybase grease or engine assembly lube should be used to lubricate the camshaft bearing journals and cam lobes.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the procedure for removing the camshaft for the 2009 Dodge Grand Caravan? Posted by Customer
    A:
    Detach the timing chain, sprockets, lifters, and pushrods, then remove the camshaft thrust plate. Use a long bolt as a handle to carefully pull the camshaft out, supporting it to prevent damage to the bearings.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the camshaft be lubricated before reinstallation for the 1998 Dodge Grand Caravan? Posted by Customer
    A:
    Lubricate the camshaft bearing journals and lobes with moly-base grease or engine assembly lube.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4781013AA, the Right Choice

To ensure reliability, purchase Mopar part # 4781013AA Engine Camshaft. It is sometimes referred to as Chrysler Camshaft. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Town & Country, Voyager models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4781013AA Engine Camshaft. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly