Make sure this part fits

Chrysler 4663674AF Chain-Timing Secondary

2009-2010 Chrysler 4663674AF

Customer Questions & Expert Answers (13)
Mopar 4663674AF Chain-Timing Secondary
  • Part Description
    Chain Timing Secondary
  • Manufacturer
    Mopar
Make sure this part fits
$34.87 MSRP: $70.95
You Save: $36.08 (51%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4663674AF
    Part DescriptionChain Timing Secondary
    Other NamesChain
    Item Dimensions0.7 x 5.3 x 13.1 inches
    Item Weight0.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4663674AF
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2010 Chrysler 3006 Cyl 2.7LC AWD, C RWD, LX RWD, Touring RWD
    2009-2010 Chrysler Sebring6 Cyl 2.7LLimited Sedan, LX Sedan, Touring Convertible, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4663674AF fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed before accessing the timing chain and related parts for the 2005 Chrysler 300? Posted by Customer
    A:
    Drain the cooling system and engine oil. Remove the engine cover, air filter housing, air intake duct, drivebelt, engine cooling fans, air conditioning compressor, alternator, drivebelt tensioner, idler pulleys, vibration damper, and power steering pump. Also, remove the dipstick tube, oil pan, pickup tube, heater hoses, water pump, and timing chain cover bolts.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Timing Chain
    Q:
    What tools are required if the crankshaft sprocket needs removal or installation for the 2006 Chrysler 300? Posted by Customer
    A:
    If the crankshaft sprocket needs removal or installation, it necessitates special tools like a three-jaw puller, propane torch or sprocket installation tool, and a machinist ruler or dial caliper.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the role of the oil pump in the balance shaft module for the 2007 Chrysler Sebring? Posted by Customer
    A:
    The oil pump is an integral component of the balance shaft module and cannot be removed or disassembled from it. If there is a problem with the oil pump, the entire balance shaft module must be replaced.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the process for reinstalling the BSM for the 2009 Dodge Avenger? Posted by Customer
    A:
    Place the timing chain over the crankshaft sprocket, aligning the plated link with the timing mark or previously made marks. Lift the BSM and place the drive sprocket into the timing chain, aligning the plated link with the timing mark on the drive gear.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the caution regarding the timing system for the 2008 Chrysler Sebring? Posted by Customer
    A:
    The timing system is complex, and severe engine damage will occur if mistakes are made. Only highly experienced individuals should attempt this procedure, and if there is any uncertainty, consulting an expert is advised.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be inspected and potentially replaced during the timing chain replacement procedure for the 2008 Dodge Avenger? Posted by Customer
    A:
    It is advisable to thoroughly inspect and replace the water pump if necessary during this procedure.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed next for the 2010 Chrysler Sebring? Posted by Customer
    A:
    Remove the water pump pulley and, for 2014 and earlier models, the air conditioning compressor and bracket. Remove specific oil pan bolts as instructed, support the engine, and remove the right-side engine mount and its bracket.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the timing chain cover after installation for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Clean old sealant from the timing chain cover, apply RTV sealant to the gasket, and install the cover with bolts tightened to the specified torque.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Timing Chain
    Q:
    What is the caution regarding the timing system for the 2008 Dodge Avenger? Posted by Customer
    A:
    The timing system is complex, and severe engine damage will occur if mistakes are made. Only highly experienced individuals should attempt this procedure, and if there is any uncertainty, consulting an expert is advised.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before attempting to remove the timing chain for the 2010 Dodge Charger? Posted by Customer
    A:
    Before removing the timing chain, it's important to inspect the primary timing chain as per Step 19.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you proceed with the timing chain cover for the 2014 Dodge Avenger? Posted by Customer
    A:
    Take out the timing chain cover mounting bolts, carefully pry the cover free, and clean off any RTV gasket material. If the engine has moved from TDC, temporarily install the crankshaft pulley bolt and align the timing marks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Timing Chain
    Q:
    How is the timing chain removed once the sprockets are aligned for the 2008 Dodge Charger? Posted by Customer
    A:
    Remove the camshaft sprocket bolt and timing chain with the camshaft and crankshaft sprockets.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Timing Chain
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4663674AF, the Right Choice

To ensure reliability, purchase Mopar part # 4663674AF Chain-Timing Secondary. It is sometimes referred to as Chrysler Timing Chain. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300, Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4663674AF Chain-Timing Secondary. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly