Make sure this part fits

Chrysler 5175829AB Cover-CRANKSHAFT Rear Oil

2005-2010 Chrysler 5175829AB

Customer Questions & Expert Answers (27)
Mopar 5175829AB Cover-CRANKSHAFT Rear Oil
  • Part Description
    RETAINER And Seal Crankshaft Rear Oil
  • Position
    Rear
  • Replaces
    4663622AC, 5175829AA
  • Manufacturer
    Mopar
Make sure this part fits
$135.23 MSRP: $204.00
You Save: $68.77 (34%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number5175829AB
    Part DescriptionRETAINER And Seal Crankshaft Rear Oil
    Other NamesRear Main Seal, Rear Main Seal Retainer
    Item Dimensions12.7 x 7.2 x 2.2 inches
    Item Weight1.30 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces4663622AC, 5175829AA
    ManufacturerMopar
    SKU5175829AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2010 Chrysler 3006 Cyl 2.7LBase RWD, C AWD, C RWD, LX RWD, Touring RWD
    2005-2010 Chrysler Sebring6 Cyl 2.7LBase Convertible, Base Sedan, GTC Convertible, LX Convertible, LX Sedan, Limited Convertible, Limited Sedan, TSI Sedan, Touring Convertible, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5175829AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new seal be prepared before installation for the 2008 Dodge Avenger? Posted by Customer
    A:
    Apply clean engine oil or multi-purpose grease to the outer edge of the new seal.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if replacing the seal while the timing chain cover is off for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Support the cover on two blocks of wood and drive the seal out from the backside using a hammer and punch, ensuring not to scratch or distort the area where the seal fits to prevent leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after installing the seal for the 2009 Chrysler Sebring? Posted by Customer
    A:
    The remainder of the installation is the reverse of removal.
    Posted by MoparPartsGiant Specialist
    Q:
    What type of rear main oil seal is used in the 2007 Chrysler 300? Posted by Customer
    A:
    V8 engines use a one-piece rear main oil seal that is installed in a bolt-on housing.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed before accessing the vibration damper for the 2010 Chrysler 300? Posted by Customer
    A:
    Remove the engine drivebelt. Drain the coolant, remove the upper radiator hose, and remove the engine cooling fan.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do before reinstalling the crankshaft pulley for the 2007 Chrysler 300? Posted by Customer
    A:
    Lubricate the seal lips with engine oil.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should the old seal be removed for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Carefully pry out the old seal with a hook-type seal tool, avoiding scratches on the crankshaft's seal surface, and note the installation depth and orientation for the new seal.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final step in the installation process for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Install the crankshaft balancer, with the remainder of the installation being the reverse of the removal process.
    Posted by MoparPartsGiant Specialist
    Q:
    Can the rear main seal and housing be serviced separately for the 2009 Chrysler 300? Posted by Customer
    A:
    No, the rear main seal and housing are serviced as one complete assembly.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the process of replacing the crankshaft seal for the 2008 Dodge Avenger? Posted by Customer
    A:
    The first step is to remove the crankshaft pulley from the engine.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the next step after installing the new oil seal housing for the 2010 Chrysler Sebring? Posted by Customer
    A:
    After attaching the oil seal housing and slightly tightening the bolts, install special alignment tools onto the oil pan rails.
    Posted by MoparPartsGiant Specialist
    Q:
    Why is it important to avoid damaging the seal bore or crankshaft for the 2007 Chrysler Sebring? Posted by Customer
    A:
    It is important to avoid scratching, gouging, or distorting the area where the seal fits, as this could lead to an oil leak.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should the new seal be installed for the 2012 Dodge Avenger? Posted by Customer
    A:
    Install the seal with the seal lip toward the engine and the dust seal toward the transaxle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be applied to the lower corners of the seal retainer for the 2009 Dodge Avenger? Posted by Customer
    A:
    A 1/4-inch bead of RTV sealant should be applied where the lower corners of the seal retainer meet the oil pan.
    Posted by MoparPartsGiant Specialist
    Q:
    Are any special tools required for this procedure for the 2013 Dodge Avenger? Posted by Customer
    A:
    Yes, several special tools are required.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the driveplate for the 2014 Dodge Avenger? Posted by Customer
    A:
    Next, remove the rear main oil seal housing bolts and the housing.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if replacing the seal while the timing chain cover is off for the 2010 Dodge Avenger? Posted by Customer
    A:
    Support the cover on two blocks of wood and drive the seal out from the backside using a hammer and punch, ensuring not to scratch or distort the area where the seal fits to prevent leaks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be done to the new seal before installation for the 2013 Dodge Avenger? Posted by Customer
    A:
    Lubricate the inner lip of the new seal with engine oil.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do after removing the seal for the 2010 Dodge Charger? Posted by Customer
    A:
    Clean the bore to remove any old seal material and corrosion.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    Are any special tools required for this procedure for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Yes, several special tools are required.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the process of replacing the rear main oil seal for the 2009 Chrysler Sebring? Posted by Customer
    A:
    The first step is to remove the oil pans and the driveplate.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done to the seal lips before reinstalling the vibration damper for the 2009 Dodge Charger? Posted by Customer
    A:
    Lubricate the seal lips with engine oil before reinstalling the vibration damper.
    Posted by MoparPartsGiant Specialist
    Q:
    How can the old rear main oil seal be removed from the housing for the 2006 Dodge Charger? Posted by Customer
    A:
    The old rear main oil seal can be removed by prying it out of the housing with a screwdriver, taking care not to damage the crankshaft surface.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the crankshaft pulley for the 2009 Chrysler 300? Posted by Customer
    A:
    The timing belt should be removed.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the rear main oil seal housing for the 2007 Dodge Charger? Posted by Customer
    A:
    The rear main oil seal housing bolts and the housing need to be removed.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final step of the installation process for the 2007 Dodge Charger? Posted by Customer
    A:
    The dowel pin should be tapped back into the crankshaft, with 3/64-inch extending out.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5175829AB, the Right Choice

To ensure reliability, purchase Mopar part # 5175829AB Cover-CRANKSHAFT Rear Oil. It is sometimes referred to as Chrysler Crankshaft Seal. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300, Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5175829AB Cover-CRANKSHAFT Rear Oil. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly