How do you remove and install a crankshaft seal in 2.7L V6 engine on Chrysler Sebring?

To access the crankshaft sprocket remove the crankshaft pulley from the engine. Remove the seal with a seal removal tool, or a large screwdriver, enlarging the area around the seal bore and the crankshaft without damaging them. Seal or interface with the oil should not be scratched, gaoed or otherwise altered in a way that will hinder proper fitting. Scrape out the bore to remove any remnants of the seal material and rust or any other form of corrosion and then place the new seal in the bore of the shaft such that the side of the seal that contains the spring is placed towards the interior of the engine. The use of a small quantity of oil in the outer circumference of the new seal aids installation, although it is not advisable to use considerable amount of oil. Place a seal driver or a large socket over the seal and forcefully hit it with a hammer until the seal is forced into the bore and bottoms on the cover flange while the socket goes around the outside diameter of the seal. Oil the seal lips with the engine oil and then replace the crankshaft pulley. The residual installation steps are done in the reverse manner to the removal process and then a test of the engine should be conducted in order to check the oil leakage.

Genuine Chrysler Sebring Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Crankshaft Seals found

View related parts
Chrysler Sebring Seal-CRANKSHAFT Oil
Part Number: 2142125000
$21.51 MSRP: $31.85
You Save: $10.34 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Seal-CRANKSHAFT Oil
Part Number: 4792317AB
$22.32 MSRP: $33.15
You Save: $10.83 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Replaces: 4792317, 4273275
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 6 Cyl 3.5L
View related parts
Chrysler Sebring Seal-Rear Main CRANKSHAFT
Part Number: 4621939AB
$24.23 MSRP: $35.75
You Save: $11.52 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal Rear Main Crankshaft; Rear Main Seal, Rear Seal
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Seal-Front Main CRANKSHAFT
Part Number: 4667198
$19.35 MSRP: $22.95
You Save: $3.60 (16%)
ADD TO CART
Product Specifications
- Other Name: Seal Front Main Crankshaft; Front Cover Seal, Front Crank Seal, Front Seal
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, LX Convertible, LX Sedan, LXi Sedan, Limited Convertible, Limited Sedan, Touring Sedan | 4 Cyl 2.4L
- 1995-1999 Chrysler Sebring | JX, JXi, LX | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Chrysler Sebring Seal-CRANKSHAFT Oil
Part Number: 4663618
$19.58 MSRP: $29.00
You Save: $9.42 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal Front Main Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring RETAINER-CRANKSHAFT Rear Oil
Part Number: 4663870AB
$125.79 MSRP: $167.00
You Save: $41.21 (25%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil
- Position: Rear
- Replaced by: 4663870AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 6 Cyl 3.5L
View related parts
Chrysler Sebring Cover-CRANKSHAFT Rear Oil
Part Number: 5175829AB
$135.23 MSRP: $204.00
You Save: $68.77 (34%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil; Rear Main Seal, Rear Main Seal Retainer
- Position: Rear
- Replaces: 4663622AC, 5175829AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, LX Convertible, LX Sedan, Limited Convertible, Limited Sedan, TSI Sedan, Touring Convertible, Touring Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Seal-CRANKSHAFT
Part Number: MD343563
$10.02 MSRP: $16.35
You Save: $6.33 (39%)
ADD TO CART
Product Specifications
- Other Name: Oil Seal Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4L
View related parts
Chrysler Sebring Seal-Rear Main CRANKSHAFT
Part Number: 4663625
$56.37 MSRP: $72.95
You Save: $16.58 (23%)
ADD TO CART
Product Specifications
- Other Name: Seal Rear Main Crankshaft; Rear Main Seal, Rear Main Seal Gasket
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Touring Convertible, Touring Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Seal-CRANKSHAFT
Part Number: MD359158
$15.44 MSRP: $25.20
You Save: $9.76 (39%)
ADD TO CART
Product Specifications
- Other Name: Oil Seal Crankshaft; Rear Main Seal
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4L
View related parts
Chrysler Sebring Seal-CRANKSHAFT Oil
Part Number: 5047167AA
$4.68 MSRP: $6.80
You Save: $2.12 (32%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Rear; Rear Main Seal, Rear Seal
- Replaces: 2144325000
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | LX Convertible, LX Sedan, Limited Convertible, Limited Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring RETAINER-CRANKSHAFT Rear Oil
Part Number: 4663870AC
$110.70 MSRP: $167.00
You Save: $56.30 (34%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil; Rear Main Seal, Rear Main Seal Retainer
- Position: Rear
- Replaces: 4663870AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | LX Convertible, LX Sedan, Limited Convertible, Limited Sedan, Touring Sedan | 6 Cyl 3.5L
View related parts
Chrysler Sebring Cover-CRANKSHAFT Rear Oil Seal
Part Number: 4663622AC
$97.97 MSRP: $204.00
You Save: $106.03 (52%)
ADD TO CART
Product Specifications
- Other Name: RETAINER Crankshaft Rear Oil Seal Includes Seal and Gasket
- Position: Rear
- Replaced by: 5175829AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Cover-CRANKSHAFT Rear Oil
Part Number: 5175829AA
$97.97 MSRP: $204.00
You Save: $106.03 (52%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil
- Replaced by: 5175829AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chrysler Sebring | Base Convertible, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Seal-CRANKSHAFT Oil
Part Number: 2144325000
$4.68 MSRP: $6.80
You Save: $2.12 (32%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Rear
- Replaced by: 5047167AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Seal-CRANKSHAFT Rear Oil
Part Number: 68000669AA
$90.18 MSRP: $134.00
You Save: $43.82 (33%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan
View related parts
Chrysler Sebring Cover-CRANKSHAFT Rear Oil Seal
Part Number: 4663622
Product Specifications
- Other Name: RETAINER Crankshaft Rear Oil Seal; Rear Main Seal Retainer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Touring Convertible, Touring Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Case-CRANKSHAFT Rear Oil Seal
Part Number: MD189896
Product Specifications
- Other Name: RETAINER Crankshaft Rear Oil Seal; Rear Main Seal Retainer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | LX | 6 Cyl 3.0L
View related parts
Chrysler Sebring Seal-CRANKSHAFT Oil
Part Number: MD372249
Product Specifications
- Other Name: Seal Crankshaft Oil Front; Front Cover Seal
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | LX | 6 Cyl 3.0L
View related parts
Chrysler Sebring Seal-CRANKSHAFT Oil
Part Number: 68000666AA
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Replaces: 68001135AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan

| Page 1 of 2 |Next >

1-20 of 21 Results

Chrysler Sebring Crankshaft Seal

This is a Crankshaft Seal found in Chrysler Sebring models and it is mounted on the front of the vehicle's engine with the primary function of ensuring that it does not allow oil to leak out of the crankcase. Made from a combination of metal and rubber and in round shape, this seal is an important component in providing the lubricant to the engine in a bid to minimize the friction and consequent wearing of the engine parts. However, years down the road a Chrysler Sebring's Crankshaft Seal may go bad which always cause oil dripping and poor performance. The signs of a bad Crankshaft Seal should not be ignored particularly when the automobile has clocked many miles on the register. Crankshaft Seal should be checked on a regular basis and the damaged one should be replaced on time to have a long-lasting efficient engine for the Chrysler Sebring cars.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring Crankshaft Seal at great affordable prices. Moreover, all genuine Chrysler Sebring Crankshaft Seal come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Sebring Crankshaft Seal Parts Questions & Experts Answers

Seal-CRANKSHAFT Oil
4663618
Q: How do you remove and install a crankshaft seal in 2.7L V6 engine on Chrysler Sebring?
A: To access the crankshaft sprocket remove the crankshaft pulley from the engine. Remove the seal with a seal removal tool, or a large screwdriver, enlarging the area around the seal bore and the crankshaft without damaging them. Seal or interface with the oil should not be scratched, gaoed or otherwise altered in a way that will hinder proper fitting. Scrape out the bore to remove any remnants of the seal material and rust or any other form of corrosion and then place the new seal in the bore of the shaft such that the side of the seal that contains the spring is placed towards the interior of the engine. The use of a small quantity of oil in the outer circumference of the new seal aids installation, although it is not advisable to use considerable amount of oil. Place a seal driver or a large socket over the seal and forcefully hit it with a hammer until the seal is forced into the bore and bottoms on the cover flange while the socket goes around the outside diameter of the seal. Oil the seal lips with the engine oil and then replace the crankshaft pulley. The residual installation steps are done in the reverse manner to the removal process and then a test of the engine should be conducted in order to check the oil leakage.