Make sure this part fits

Chrysler 4720931 Cylinder - Door Lock Uncoded

1993-1995 Chrysler 4720931

Customer Questions & Expert Answers (6)
Mopar 4720931 Cylinder - Door Lock Uncoded
  • Part Description
    Cylinder - Door Lock Uncoded
  • Manufacturer
    Mopar
Make sure this part fits
$29.63 MSRP: $42.80
You Save: $13.17 (31%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4720931
    Part DescriptionCylinder - Door Lock Uncoded
    Other NamesCylinder & Key, Lock Cylinder
    Item Dimensions5.7 x 4.2 x 0.1 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4720931
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1993 Chrysler Imperial6 Cyl 3.8LBase
    1993-1995 Chrysler LeBaron4 Cyl 2.5L, 6 Cyl 3.0L2 Door Convertible, 2 Door Sedan, GTC (2 Door Convertible), Landau, LE, LX (2 Door Convertible), LX (2 Door Sedan)
    1993 Chrysler New Yorker6 Cyl 3.3L, 6 Cyl 3.8LFifth Avenue, Salon
    1993-1995 Chrysler Town & Country6 Cyl 3.3L, 6 Cyl 3.8LBase AWD, Base FWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4720931 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you replace the Door Handle,latch and lock cylinder on Chrysler Imperial? Posted by Customer
    A:
    When installing a new latch, simply close the window and then take off the door trim panel and the watershield. First, if this is the earlier model, unscrew two Torx-head link rods from the latch, then remove the three Torx-head mounting screws if they are overtightened, using an impact-type screwdriver if possible. Closely unscrew the latch then place the new latch and screw it in tightly until they are tightly fixed. Connect the link rods to the latch and ensure that the door will close well, if the latch is an issue, engage the screws and adjust the latch until the door closes properly with the handle flat. After that tighten the linkage adjusting screw with a 5/32-inches hex-head wrench through the adjustment hole, after that, move the squab up in the slot to remove extra Loose from linkage. For the lock cylinder of the outside door handle, it is necessary to disconnect the connecting link and then push the retainer of the key lock cylinder with use of a screwdriver to pull the lock cylinder out of the door and the process of installation is opposite to the mentioned procedure. To remove the outside handle, push down on the end of the remote control link which disengages the latch, unscrew the two nuts on the mounting plate and remove the handle from the door. Last but not the least, position the handle, connect the link and fix the nuts properly on to the Link fixed on Link rod.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove and install the lock cylinder from the door panel on Dodge Ramcharger? Posted by Customer
    A:
    Remove the trim panel, then work through the door panel access hole to disconnect the linkage from the lock cylinder. Next, remove the retaining clip and take out the lock cylinder. Installation is the reverse of the removal process.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the lock cylinder for the 2012 Dodge Grand Caravan? Posted by Customer
    A:
    Remove the outside door handle, disconnect the link, and use a screwdriver to push the key lock cylinder retainer off to withdraw the lock cylinder from the door. Installation is the reverse of removal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Door Lock Cylinder
    Q:
    Is everything in the picture included ? Posted by Customer: 1994 Jeep Wrangler
    A:
    Part #4720931 is just the door lock cylinder.
    Posted by MoparPartsGiant Specialist 8/12/2022
    Q:
    Do these come as a pair that are keyed alike? I need them for both doors. Posted by Customer: 1993 Jeep Wrangler
    A:
    PART IS SOLD IN SINGLE AND DO NOT COME WITH TUMBLERS OR SPRINGS.
    Posted by MoparPartsGiant Specialist 27/9/2022
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4720931, the Right Choice

To ensure reliability, purchase Mopar part # 4720931 Cylinder - Door Lock Uncoded. It is sometimes referred to as Chrysler Door Lock Cylinder. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Imperial, LeBaron, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4720931 Cylinder - Door Lock Uncoded. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly