Make sure this part fits

Chrysler 5170620AA Head-Cylinder

2005-2010 Chrysler 300 5170620AA

Customer Questions & Expert Answers (14)
Mopar 5170620AA Head-Cylinder
  • Part Description
    Head Cylinder Right
  • Replaces
    RL170620AA
  • Manufacturer
    Mopar
Make sure this part fits
$1158.15 MSRP: $1410.00
You Save: $251.85 (18%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number5170620AA
    Part DescriptionHead Cylinder Right
    Other NamesCylinder Head
    Item Dimensions23.7 x 12.2 x 9.2 inches
    Item Weight43.50 Pounds
    ConditionNew
    ReplacesRL170620AA
    ManufacturerMopar
    SKU5170620AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2010 Chrysler 3008 Cyl 6.1LC RWD, C SRT8 RWD, Touring RWD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5170620AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the new gasket during installation for the 2006 Chrysler 300? Posted by Customer
    A:
    Position the new gasket over the dowel pins, check camshaft installation, and place the head on the block without disturbing the gasket.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the head bolts be loosened for the 2015 Dodge Challenger? Posted by Customer
    A:
    Loosen the head bolts in 1/4-turn increments in the opposite pattern of the tightening sequence until they can be removed by hand, storing them in order to ensure proper reinstallation.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps should be followed when preparing to install the cylinder heads for the 2008 Chrysler 300? Posted by Customer
    A:
    To prepare for installation, ensure that the mating surfaces of the block and heads are clean and free of debris. Use a gasket scraper and lacquer thinner or acetone to clean the surfaces. Check for any damage and address it using emery cloth or machining if necessary. Chase the threads in the head bolt holes and clean the bolt threads.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be removed after taking out the primary timing chain and sprockets for the 2009 Chrysler 300? Posted by Customer
    A:
    Following the removal of the primary timing chain and sprockets, proceed to remove the camshafts from the cylinder head.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What is the first step to remove the components for the 2012 Dodge Challenger? Posted by Customer
    A:
    First, disconnect the cable from the negative terminal of the battery, ensuring to disconnect the Intelligent Battery Sensor connector first on 2015 and later models.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the cylinder heads be placed on the block during installation for the 2006 Dodge Charger? Posted by Customer
    A:
    Carefully place the heads on the block without disturbing the gaskets.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the head bolts during installation for the 2006 Dodge Charger? Posted by Customer
    A:
    Apply clean engine oil to the head bolt threads and hardened washers, then tighten the bolts in the specified sequence.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be done after reinstalling the components for the 2009 Dodge Challenger? Posted by Customer
    A:
    Refill the cooling system and change the engine oil and filter, then start the engine and check for oil and coolant leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new gasket be positioned for the 2011 Dodge Challenger? Posted by Customer
    A:
    Position the new gasket over the dowel pins in the block, ensuring correct installation.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What components should be installed on the cylinder head during installation for the 2006 Dodge Magnum? Posted by Customer
    A:
    Install components removed from the head, position the new cylinder head gasket correctly over the dowel pins on the block, and place the head over the dowels without disrupting the gasket.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new gaskets be positioned for the 2007 Dodge Magnum? Posted by Customer
    A:
    Position the new gaskets correctly on the dowels in the block.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How should the camshaft sprocket bolt be loosened for the 2006 Dodge Charger? Posted by Customer
    A:
    Loosen the camshaft sprocket bolt with a wrench while holding the sprocket hex and remove the camshaft thrust plate, allowing the camshaft to slide back.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be ensured when lifting the head(s) off the engine for the 2007 Dodge Magnum? Posted by Customer
    A:
    Lift the head(s) off the engine, ensuring all bolts are removed, and place them on wooden blocks.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5170620AA, the Right Choice

To ensure reliability, purchase Mopar part # 5170620AA Head-Cylinder. It is sometimes referred to as Chrysler Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5170620AA Head-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly