Make sure this part fits

Chrysler R5420659 Head-Cylinder

1997-2000 Chrysler R5420659

Customer Questions & Expert Answers (13)
Mopar R5420659 Head-Cylinder
  • Part Description
    Head Cylinder
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part NumberR5420659
    Part DescriptionHead Cylinder
    Item Dimensions21.3 x 11.1 x 9.7 inches
    Item Weight41.40 Pounds
    ConditionNew
    ManufacturerMopar
    SKUR5420659
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1997-2000 Chrysler Cirrus4 Cyl 2.4LLX, LXi
    2000 Chrysler Grand Voyager
    1997-1999 Chrysler Sebring4 Cyl 2.4LJX, JXi
    1998-2000 Chrysler Town & CountryLX FWD, SX
    2000 Chrysler Voyager4 Cyl 2.4LBase
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if R5420659 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the engine was severely overheated for the 2000 Chrysler Cirrus? Posted by Customer
    A:
    If the engine was severely overheated, it is likely that the cylinder head is warped.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if any cylinder head bolt is damaged for the 2000 Chrysler Cirrus? Posted by Customer
    A:
    It must be replaced.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the valve binds in the guide for the 1997 Chrysler Cirrus? Posted by Customer
    A:
    Push it back into the head and deburr the area around the keeper groove and step tip with a fine file or whetstone.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What can be done if the installed height is greater than specified for the 1995 Chrysler Cirrus? Posted by Customer
    A:
    Shims can be added under the spring seat to correct it, but caution must be taken not to shim the springs to a point where the installed height is less than specified.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the cylinder head sticks to the engine block for the 1998 Chrysler Cirrus? Posted by Customer
    A:
    Dislodge it by placing a wood block against the head casting and tapping the wood with a hammer or by prying the head with a prybar placed carefully on a casting protrusion.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with heavy deposits on the valves for the 1996 Dodge Grand Caravan? Posted by Customer
    A:
    Heavy deposits on the valves should be scraped off, followed by using a motorized wire brush to clean the valve heads and stems, ensuring that the valves remain organized.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the proper method for loosening the cylinder head mounting bolts for the 2015 Dodge Grand Caravan? Posted by Customer
    A:
    Loosen each cylinder head mounting bolt 1/4-turn at a time, removing them in the reverse of the tightening sequence.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing and organizing the valves and components for the 1990 Dodge Grand Caravan? Posted by Customer
    A:
    After removing and organizing the valves and components, thoroughly clean and inspect the head, completing any engine disassembly before starting the cleaning and inspection process.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with springs that are shorter than specified for the 1990 Dodge Grand Caravan? Posted by Customer
    A:
    They should not be reused, and their tension should be verified with a special fixture.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the intake manifold for the 2012 Dodge Grand Caravan? Posted by Customer
    A:
    Remove the rocker arm components and hydraulic lash adjusters, then detach the exhaust manifold(s), ensuring that each manifold may remain attached to the cylinder head until after the head is removed from the engine.
    Posted by MoparPartsGiant Specialist
    Q:
    How should new valve seals be installed for the 2000 Dodge Grand Caravan? Posted by Customer
    A:
    New seals should be installed on each of the valve guides; gently tap each seal into place using a hammer and a deep socket or seal installation tool until it is completely seated on the guide. Ensure the valve stem seals are installed evenly and carefully to avoid damage.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the head bolts be loosened for the 2004 Dodge Grand Caravan? Posted by Customer
    A:
    The head bolts should be loosened in 1/4-turn increments until they can be removed by hand, following the recommended sequence to avoid warping the head.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part R5420659, the Right Choice

To ensure reliability, purchase Mopar part # R5420659 Head-Cylinder. It is sometimes referred to as Chrysler Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Cirrus, Sebring, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar R5420659 Head-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly