Make sure this part fits

Chrysler RL792925AA Head-Cylinder

2004-2010 Chrysler RL792925AA

Customer Questions & Expert Answers (8)
Mopar RL792925AA Head-Cylinder
  • Part Description
    Head Cylinder See Note
  • Replaces
    4792925AA, 5127664AA
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
$853.59 MSRP: $1000.00
You Save: $146.41 (15%)
Core Charge: $150.00
Currently Unavailable

Due to manufacturer supply shortage, this item isn’t currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part NumberRL792925AA
    Part DescriptionHead Cylinder See Note
    Other NamesCylinder Head
    Item Dimensions18.9 x 9.1 x 9.5 inches
    Item Weight26.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces4792925AA, 5127664AA
    Require Quantity2
    ManufacturerMopar
    SKURL792925AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2010 Chrysler 3006 Cyl 3.5LC AWD, C RWD, Limited AWD, Limited RWD, S V6 RWD, Touring AWD, Touring Plus RWD, Touring RWD
    2004-2008 Chrysler Pacifica6 Cyl 3.5L, 6 Cyl 4.0LBase AWD, Base FWD, LX AWD, Limited AWD, Limited FWD, Touring AWD, Touring FWD
    2007-2010 Chrysler Sebring6 Cyl 3.5LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan
    2008-2010 Chrysler Town & Country6 Cyl 4.0LLX, Limited, Touring, Touring Plus
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if RL792925AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the valves be removed from the cylinder head for the 1999 Dodge Grand Caravan? Posted by Customer
    A:
    Use a spring compressor to compress the springs on the first valve and remove the keepers. Then, carefully release the compressor and take out the retainer, spring, and spring seat if applicable. Pull the valve out of the head and remove the oil seal from the guide. If the valve binds, push it back and deburr the area around the keeper groove. Repeat this for the remaining valves, ensuring all parts for each valve are kept together.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the recommended method for cleaning rocker arm parts for the 2018 Dodge Grand Caravan? Posted by Customer
    A:
    The rocker arm parts should be cleaned with solvent and dried thoroughly, ensuring they are not mixed up, while compressed air can help clean out the oil passages.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the head bolts be stored for the 2011 Dodge Grand Caravan? Posted by Customer
    A:
    Store the head bolts in cardboard holders marked to indicate the bolt pattern, labeling them F (front) and R (rear) while indicating the timing belt end of the engine.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with springs that are shorter than specified for the 2020 Dodge Grand Caravan? Posted by Customer
    A:
    They should not be reused, and their tension should be verified with a special fixture.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the block and head mating surfaces be inspected for the 2017 Dodge Grand Caravan? Posted by Customer
    A:
    Inspect for damage, using a file for slight imperfections or considering machining for excessive damage.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if there is oil on the mating surfaces for the 1992 Dodge Grand Caravan? Posted by Customer
    A:
    If there's oil on the mating surfaces when the head is installed, the gasket may not seal correctly and leaks may develop.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be avoided during the installation of valve seals for the 2006 Dodge Grand Caravan? Posted by Customer
    A:
    Avoid twisting or cocking the seals during installation to ensure proper sealing on the valve stems.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part RL792925AA, the Right Choice

To ensure reliability, purchase Mopar part # RL792925AA Head-Cylinder. It is sometimes referred to as Chrysler Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300, Sebring, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar RL792925AA Head-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly