Make sure this part fits

Chrysler RL141352AD Head&Valve-Cylinder

2013 Chrysler 200 RL141352AD

Customer Questions & Expert Answers (13)
Mopar RL141352AD Head&Valve-Cylinder
  • Part Description
    Head Cylinder With Valves
  • Replaced By
    68141352AD
  • Manufacturer
    Mopar
Make sure this part fits
$609.17 MSRP: $1025.00
You Save: $415.83 (41%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part NumberRL141352AD
    Part DescriptionHead Cylinder With Valves
    Item Dimensions9.5 x 12.6 x 21.2 inches
    Item Weight37.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKURL141352AD
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2013 Chrysler 2006 Cyl 3.6LLimited Convertible, Limited Sedan, LX Sedan, S Convertible, Touring Convertible, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if RL141352AD fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before installing the head bolts for the 2012 Chrysler 200? Posted by Customer
    A:
    Before installing the head bolts, apply a small amount of clean engine oil to the threads and hardened washers, ensuring the chamfered side of the washers faces the bolt heads.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for installing the new cylinder head bolts for the 2012 Chrysler 200? Posted by Customer
    A:
    Install new cylinder head bolts, tightening them in the recommended sequence.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be removed after draining the fluids for the 2009 Dodge Avenger? Posted by Customer
    A:
    Remove the drivebelt, air filter housing, resonator, and intake manifolds.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for removing the camshaft thrust plate for the 2017 Chrysler 200? Posted by Customer
    A:
    Remove the camshaft thrust plate from the rear of the head and slide the camshaft back to allow for the removal of the sprocket and bolt.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be checked before installing the head bolts for the 2013 Chrysler 200? Posted by Customer
    A:
    Check the head bolt threads for gaps and apply clean engine oil before installation.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What is the final step after reinstallation for the 2009 Dodge Avenger? Posted by Customer
    A:
    The remainder of the installation is the reverse of removal. Finally, refill the cooling system and change the engine oil and filter, then start the engine and check for oil and coolant leaks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be done after reinstalling the timing chain and cover for the 2013 Dodge Avenger? Posted by Customer
    A:
    Follow the reverse order for the remaining installation steps.
    Posted by MoparPartsGiant Specialist
    Q:
    How are the new cylinder heads installed for the 2014 Ram 1500? Posted by Customer
    A:
    Position the new gaskets correctly on the dowels in the block. Carefully place the heads on the block without disturbing the gaskets. Coat the head bolt threads with engine oil and install the bolts in their original locations. Tighten the bolts following the recommended sequence and torque specifications.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for installing the cylinder head bolts for the 2017 Ram 1500? Posted by Customer
    A:
    Install new cylinder head bolts and tighten them following the recommended sequence.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the new cylinder head gasket for the 2012 Ram 1500? Posted by Customer
    A:
    The new cylinder head gasket should be positioned over dowel pins on the block, taking note of its orientation.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What are the final steps and checks after cylinder head installation for the 2016 Ram 1500? Posted by Customer
    A:
    Complete the remaining installation steps, including changing the oil and filter, refilling the cooling system, and priming the fuel filter before starting the engine.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the ignition coils and spark plugs for the 2013 Dodge Avenger? Posted by Customer
    A:
    Detach the ignition coils and spark plugs if necessary, then remove the exhaust manifold from the cylinder head being taken out.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part RL141352AD, the Right Choice

To ensure reliability, purchase Mopar part # RL141352AD Head&Valve-Cylinder. It is sometimes referred to as Chrysler Cylinder Head. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 200 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar RL141352AD Head&Valve-Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly