Make sure this part fits

Chrysler 4779218AB Hub And Bearing

2005-2009 Chrysler 300 4779218AB

Customer Questions & Expert Answers (9)
Mopar 4779218AB Hub And Bearing
  • Part Description
    Hub And Bearing Brake
  • Replaced By
    4779328AB
  • Manufacturer
    Mopar
Make sure this part fits
$258.50 MSRP: $396.00
You Save: $137.50 (35%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4779218AB
    Part DescriptionHub And Bearing Brake
    Item Dimensions6.3 x 7.2 x 7.4 inches
    Item Weight10.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4779218AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2009 Chrysler 3006 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1LBase RWD, C AWD, C RWD, C SRT8 RWD, Limited AWD, Limited RWD, Touring AWD, Touring RWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4779218AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the driveaxle/hub nut for the 2010 Chrysler 300? Posted by Customer
    A:
    Remove the driveaxle/hub nut and push the driveaxle through the hub splines as the hub and bearing assembly is removed. If the driveaxle sticks in the hub, use a puller to push it out. Take caution not to overextend the inner CV joint and support the outer end of the driveaxle with a length of wire or rope.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the hub and bearing assembly for the 2008 Dodge Charger? Posted by Customer
    A:
    To install, reverse the removal steps, making sure to tighten the hub mounting bolts, brake caliper mounting bracket bolts, caliper mounting bolts, wheel speed sensor bolt, driveaxle/hub nut, and wheel lug nuts.
    Posted by MoparPartsGiant Specialist
    Q:
    Is the hub and bearing assembly sealed-for-life for the 2010 Dodge Charger? Posted by Customer
    A:
    Yes, if any part is worn or damaged, it must be replaced as a unit.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    How do you release the hub assembly from the steering knuckle for the 2017 Dodge Challenger? Posted by Customer
    A:
    Remove the hub mounting bolts from the back of the steering knuckle enough to release the hub assembly, ensuring the hub bolts remain in the knuckle to support the brake backing plate while being cautious not to overextend the inner CV joint.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the initial steps for replacing the hub and bearing assembly on the 2011 Dodge Challenger? Posted by Customer
    A:
    Begin by loosening the wheel lug nuts, raising the front of the vehicle, and securely supporting it on jackstands under the frame rails before removing the wheel.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    How do you install the assembly for the 2009 Chrysler 300? Posted by Customer
    A:
    Reverse the removal steps, making sure to tighten the hub nut, brake caliper mounting bracket, and brake caliper mounting bolts. Finally, install the wheel, lower the vehicle, and tighten the lug nuts.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    Is the hub and bearing assembly sealed-for-life for the 2007 Dodge Magnum? Posted by Customer
    A:
    Yes, if any part is worn or damaged, it must be replaced as a unit.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    How do you install the hub and bearing assembly for the 2006 Dodge Magnum? Posted by Customer
    A:
    To install, reverse the removal steps, making sure to tighten the hub mounting bolts, brake caliper mounting bracket bolts, caliper mounting bolts, wheel speed sensor bolt, driveaxle/hub nut, and wheel lug nuts.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Wheel Hub
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4779218AB, the Right Choice

To ensure reliability, purchase Mopar part # 4779218AB Hub And Bearing. It is sometimes referred to as Chrysler Wheel Hub. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4779218AB Hub And Bearing. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly