Make sure this part fits

Chrysler 4792861AA Pan Oil

2005-2007 Chrysler 300 4792861AA

Customer Questions & Expert Answers (10)
Mopar 4792861AA Pan Oil
  • Part Description
    Pan Oil
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4792861AA
    Part DescriptionPan Oil
    Other NamesOil Pan
    Item Weight8.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4792861AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2007 Chrysler 3006 Cyl 2.7LBase RWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4792861AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the power steering gear be prepared for removal for the 2008 Chrysler 300? Posted by Customer
    A:
    Disconnect the power steering pressure switch and remove the power steering gear mounting bolts. Remove the power steering fluid line bracket and position the power steering gear off to the side.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What safety measures should be taken when raising the 2008 Chrysler 300 and working underneath it? Posted by Customer
    A:
    Raise the front of the vehicle securely on jackstands, apply the parking brake, and block the rear wheels.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the correct procedure for tightening the oil pan fasteners for the 2006 Chrysler 300? Posted by Customer
    A:
    Lift the pan into position, making sure not to disturb the gasket, install several bolts finger-tight, and check for any gasket sticking out around the block's perimeter. Once all bolts are in place, install the oil pan nuts onto the studs and tighten the fasteners following the correct torque sequence.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps should be followed during the installation process for the 2008 Dodge Charger? Posted by Customer
    A:
    For installation, start by installing a new gasket and windage tray, then wash out the oil pan with solvent. Clean the mounting surfaces of the oil pan and engine block of old gasket material and sealer.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the removal process for the 2008 Dodge Charger? Posted by Customer
    A:
    To begin the removal process, disconnect the battery's negative terminal and remove the engine oil dipstick.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the oil pan and block surfaces after removal for the 2008 Dodge Charger? Posted by Customer
    A:
    Clean the pan with solvent and remove all old sealant and gasket material from the block and pan mating surfaces. Clean the mating surfaces with lacquer thinner or acetone and make sure the bolt holes in the block are clear. Check the oil pan flange for distortion, particularly around the bolt holes.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What should be done with the intermediate shaft coupler at the steering gear for the 2006 Dodge Magnum? Posted by Customer
    A:
    Remove the intermediate shaft coupler at the steering gear and separate the steering gear input shaft from the coupler.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What components should be removed after connecting the engine hoist for the 2008 Dodge Magnum? Posted by Customer
    A:
    Remove the engine splash shield, drain the engine oil, and remove the oil filter.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the oil pan is distorted for the 2005 Dodge Magnum? Posted by Customer
    A:
    If the oil pan is distorted, straighten the flange and wipe the gasket surfaces clean with lacquer thinner or acetone.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4792861AA, the Right Choice

To ensure reliability, purchase Mopar part # 4792861AA Pan Oil. It is sometimes referred to as Chrysler Oil Pan. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4792861AA Pan Oil. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly