Make sure this part fits

Chrysler 4792861AB Pan-Oil

2008 Chrysler 300 4792861AB

Customer Questions & Expert Answers (10)
Mopar 4792861AB Pan-Oil
  • Part Description
    Pan Oil
  • Replaced By
    4792861AC
  • Manufacturer
    Mopar
Make sure this part fits
$349.80 MSRP: $535.00
You Save: $185.20 (35%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4792861AB
    Part DescriptionPan Oil
    Item Dimensions8.1 x 15.3 x 19.2 inches
    Item Weight9.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4792861AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008 Chrysler 3006 Cyl 2.7LLX RWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4792861AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    Are there any additional components to be removed before taking off the oil pan for the 2009 Chrysler 300? Posted by Customer
    A:
    Yes, remove the transmission-to-oil pan support brace at the rear of the pan. Detach any clips securing the transmission oil cooler lines that would interfere with removal of the oil pan. Also, remove the lower bolt securing the air conditioning compressor to the oil pan and the bolt securing the alternator bracket to the oil pan.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What components should be removed after connecting the engine hoist for the 2005 Chrysler 300? Posted by Customer
    A:
    Remove the engine splash shield, drain the engine oil, and remove the oil filter.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be removed after the initial steps for the 2008 Chrysler 300? Posted by Customer
    A:
    After the initial steps, you should remove the engine splash shield and disconnect the exhaust pipes from the exhaust manifolds. Remove the engine cooling fans and shroud, and then remove the power steering gear from the crossmember.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the 2009 Dodge Charger be prepared before working on the oil pan? Posted by Customer
    A:
    Apply the parking brake and block the rear wheels. Then, raise the front of the vehicle and place it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What should be done for installation for the 2008 Dodge Charger? Posted by Customer
    A:
    For installation, clean the pan and mating surfaces thoroughly, ensuring all old sealant and gasket material is removed.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the engine be prepared for removal for the 2006 Dodge Charger? Posted by Customer
    A:
    Connect an engine hoist to the engine, remove the left and right side engine mount-to-subframe nuts and studs, and raise the engine slightly.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the final steps after oil pan installation for the 2008 Dodge Magnum? Posted by Customer
    A:
    Complete the installation by following the reverse order of removal steps, add the appropriate oil type and quantity, change the oil filter, refill the cooling system, start the engine, and check for leaks before returning the vehicle to service.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the engine oil dipstick during the removal process for the 2007 Dodge Magnum? Posted by Customer
    A:
    Remove the engine oil dipstick.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pan
    Q:
    What are the final steps after completing the installation for the 2007 Dodge Magnum? Posted by Customer
    A:
    Finally, complete the remaining steps in reverse order, refill the engine with oil, replace the filter, run it until reaching normal operating temperature, and check for leaks.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4792861AB, the Right Choice

To ensure reliability, purchase Mopar part # 4792861AB Pan-Oil. It is sometimes referred to as Chrysler Oil Pan. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4792861AB Pan-Oil. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly