Make sure this part fits

Chrysler 4663870AB RETAINER-CRANKSHAFT Rear Oil

2004-2009 Chrysler 4663870AB

Customer Questions & Expert Answers (45)
Mopar 4663870AB RETAINER-CRANKSHAFT Rear Oil
  • Part Description
    RETAINER And Seal Crankshaft Rear Oil
  • Position
    Rear
  • Replaced By
    4663870AC
  • Manufacturer
    Mopar
Make sure this part fits
$125.79 MSRP: $167.00
You Save: $41.21 (25%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4663870AB
    Part DescriptionRETAINER And Seal Crankshaft Rear Oil
    Item Dimensions1.1 x 10.5 x 13.6 inches
    Item Weight1.10 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4663870AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2009 Chrysler 3006 Cyl 3.5LC AWD, C RWD, Limited AWD, Limited RWD, Touring AWD, Touring RWD
    2004-2008 Chrysler Pacifica6 Cyl 3.5L, 6 Cyl 4.0LBase AWD, Base FWD, Limited AWD, Limited FWD, LX AWD, Touring AWD, Touring FWD
    2007-2009 Chrysler Sebring6 Cyl 3.5LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan
    2008-2009 Chrysler Town & Country6 Cyl 4.0LLimited, Touring
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4663870AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How should you position the new seal in the bore for the 2007 Chrysler 300? Posted by Customer
    A:
    Position the new seal in the bore with the seal lip (usually the side with the spring) facing IN (toward the engine).
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What components are serviced together in this procedure for the 2014 Dodge Avenger? Posted by Customer
    A:
    The rear main seal and housing are serviced as one complete assembly.
    Posted by MoparPartsGiant Specialist
    Q:
    How is the new seal installed for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Drive the new seal in using a seal driver or a large deep socket and hammer, ensuring it is installed to the same depth as the old one.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final step of the installation process for the 2010 Chrysler 300? Posted by Customer
    A:
    The dowel pin should be tapped back into the crankshaft, with 3/64-inch extending out.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the process for the 2010 Chrysler Sebring? Posted by Customer
    A:
    The first step is to remove the transaxle and then the driveplate.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if replacing the seal while the timing chain cover is off for the 2009 Chrysler Sebring? Posted by Customer
    A:
    Support the cover on two blocks of wood and drive the seal out from the backside with a hammer and punch, taking care not to scratch or distort the area where the seal fits to prevent leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new seal be positioned in the bore for the 2010 Chrysler Sebring? Posted by Customer
    A:
    Position the new seal in the bore with the seal lip, typically the side with the spring, facing inward toward the engine.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What type of rear main oil seal is used in the 2008 Chrysler 300? Posted by Customer
    A:
    V8 engines use a one-piece rear main oil seal that is installed in a bolt-on housing.
    Posted by MoparPartsGiant Specialist
    Q:
    Can the rear main seal and housing be serviced separately for the 2008 Chrysler 300? Posted by Customer
    A:
    No, the rear main seal and housing are serviced as one complete assembly.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after tightening the bolts for the 2008 Chrysler Sebring? Posted by Customer
    A:
    The remainder of the installation follows the reverse order of removal.
    Posted by MoparPartsGiant Specialist
    Q:
    What cleaning steps are necessary before installing the new seal and retainer assembly for the 2008 Dodge Avenger? Posted by Customer
    A:
    Clean the engine block, oil pan, and crankshaft, ensuring the new seal and retainer assembly has the plastic installation sleeve in place.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the crankshaft be prepared before installing the new oil seal housing for the 2008 Dodge Avenger? Posted by Customer
    A:
    Lubricate the crankshaft with clean engine oil.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final step after installing the new oil seal housing for the 2011 Dodge Challenger? Posted by Customer
    A:
    The remainder of the installation follows the reverse order of removal.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done to the crankshaft seal journal and the new seal before installation for the 2010 Dodge Avenger? Posted by Customer
    A:
    Lubricate the crankshaft seal journal and the lip of the new seal with multi-purpose grease.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the initial steps to begin the replacement process for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Begin by removing the transaxle and the oil pan, followed by the driveplate.
    Posted by MoparPartsGiant Specialist
    Q:
    How should you secure the crankshaft to prevent it from turning during the removal of the vibration damper for the 2008 Chrysler 300? Posted by Customer
    A:
    To keep the crankshaft from turning, install a chain wrench or strap wrench around the circumference of the pulley. Be sure to use a piece of rubber under the chain wrench to protect the vibration damper from nicks or gouges.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the balancer hub be prepared before installation for the 2012 Dodge Avenger? Posted by Customer
    A:
    Lubricate the balancer hub with clean engine oil.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be done before starting the procedure for the 2007 Chrysler Sebring? Posted by Customer
    A:
    It is important to read the procedure carefully before starting.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the balancer hub be prepared before installation for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Lubricate the balancer hub with clean engine oil.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the old seal be removed for the 2012 Dodge Avenger? Posted by Customer
    A:
    Carefully pry out the old seal with a hook-type seal tool, avoiding scratches on the crankshaft's seal surface, and note the installation depth and orientation for the new seal.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new seal be installed for the 2012 Dodge Avenger? Posted by Customer
    A:
    Install the seal in the cover with the lip facing inward, using a large socket and hammer to drive it into place squarely, stopping when the front face is at the proper depth. A piece of pipe can be used if a large socket is unavailable.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done to the bore before installing the new seal for the 2013 Dodge Avenger? Posted by Customer
    A:
    Clean the bore to eliminate any old seal material and corrosion.
    Posted by MoparPartsGiant Specialist
    Q:
    Are any special tools required for this procedure for the 2012 Dodge Challenger? Posted by Customer
    A:
    Yes, several special tools are required.
    Posted by MoparPartsGiant Specialist
    Q:
    What tool is used to extract the dowel pin from the crankshaft for the 2011 Dodge Challenger? Posted by Customer
    A:
    A hammer and punch are used to tap the dowel pin out of the crankshaft, driving it into the hollow, threaded area of the crankshaft snout for extraction with a small magnet.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the balancer hub be prepared before installation for the 2009 Dodge Challenger? Posted by Customer
    A:
    Lubricate the balancer hub with clean engine oil.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be checked on the surface of the damper that the oil seal rides on for the 2010 Dodge Charger? Posted by Customer
    A:
    Check the surface of the damper that the oil seal rides on. If the surface has been grooved from long-time contact with the seal, replace the vibration damper.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the process of removing the engine components for the 2012 Dodge Challenger? Posted by Customer
    A:
    Disconnect the cable from the negative terminal of the battery, ensuring that on 2015 and later models equipped with an Intelligent Battery Sensor, the IBS connector is disconnected first.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed after disconnecting the battery for the 2007 Dodge Grand Caravan? Posted by Customer
    A:
    You need to remove the drivebelts, crankshaft pulley, and timing belt.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be removed before replacing the rear main seal for the 2006 Dodge Charger? Posted by Customer
    A:
    The transmission and the oil pan need to be removed.
    Posted by MoparPartsGiant Specialist
    Q:
    Why is it important to note how far the old seal is recessed for the 2015 Dodge Grand Caravan? Posted by Customer
    A:
    The new seal must be recessed the same amount as the old seal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What steps should be followed for the 2013 Dodge Challenger during installation? Posted by Customer
    A:
    For 2007 and later models, the engine oil should be drained, followed by the removal of the oil pan. The crankshaft seal retainer/housing mounting bolts should then be removed, and the retainer assembly discarded. The new seal should be carefully slid over the crankshaft, and the seal housing bolted to the block using a new gasket, with bolts tightened in a criss-cross pattern to the specified torque. The remainder of the installation follows the reverse of the removal procedure.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new seal be prepared before installation for the 1991 Dodge Grand Caravan? Posted by Customer
    A:
    Lubricate the lips of the new seal with engine oil or multi-purpose grease.
    Posted by MoparPartsGiant Specialist
    Q:
    What type of rear main oil seal is used in the 2006 Dodge Charger? Posted by Customer
    A:
    V8 engines use a one-piece rear main oil seal that is installed in a bolt-on housing.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new seal be installed for the 2010 Dodge Charger? Posted by Customer
    A:
    The inner lip of the new seal should be lubricated with engine oil and then driven in using a seal driver or a large deep socket and a hammer.
    Posted by MoparPartsGiant Specialist
    Q:
    How should you handle the seal during removal for the 2009 Dodge Charger? Posted by Customer
    A:
    Be careful not to scratch, gouge or distort the area that the seal fits into or an oil leak will develop.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What needs to be done once the oil seal housing is attached for the 2007 Dodge Magnum? Posted by Customer
    A:
    Special alignment tools need to be installed onto the oil pan rails.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do after reinstalling the crankshaft pulley for the 2008 Dodge Magnum? Posted by Customer
    A:
    Run the engine and check for oil leaks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    Is there any preparation needed for the new seal before installation for the 2012 Dodge Challenger? Posted by Customer
    A:
    Yes, applying a small amount of oil to the outer edge of the new seal can facilitate installation, but it should not be excessive.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should the new rear main oil seal be worked onto the seal journal of the crankshaft for the 2008 Dodge Magnum? Posted by Customer
    A:
    The lip of the seal is stiff, so it should be worked onto the seal journal of the crankshaft slowly to avoid damage.
    Posted by MoparPartsGiant Specialist
    Q:
    How can the oil pan be removed for the 2000 Dodge Grand Caravan? Posted by Customer
    A:
    Remove the oil pan; note that it is possible to remove the seal without taking off the oil pan if a special seal puller tool is used.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the recommended method for changing the rear main seal if removing the oil pan and retainer is not preferred for the 1992 Dodge Grand Caravan? Posted by Customer
    A:
    The recommended method is to first remove the transaxle, then take off the oil pan. After that, remove the rear main oil seal retainer bolts and the retainer.
    Posted by MoparPartsGiant Specialist
    Q:
    How should you secure the crankshaft to prevent it from turning during the removal of the vibration damper for the 2008 Dodge Magnum? Posted by Customer
    A:
    To keep the crankshaft from turning, install a chain wrench or strap wrench around the circumference of the pulley. Be sure to use a piece of rubber under the chain wrench to protect the vibration damper from nicks or gouges.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the crankshaft pulley for the 2006 Dodge Magnum? Posted by Customer
    A:
    The timing belt should be removed.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final step after installing the new seal for the 2008 Dodge Grand Caravan? Posted by Customer
    A:
    Reinstall the vibration damper.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4663870AB, the Right Choice

To ensure reliability, purchase Mopar part # 4663870AB RETAINER-CRANKSHAFT Rear Oil. It is sometimes referred to as Chrysler Crankshaft Seal. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300, Sebring, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4663870AB RETAINER-CRANKSHAFT Rear Oil. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly