Chrysler V5015650 Rear Brake Rotor

You can Select Your Vehicle to check if V5015650 fits your vehicle.

To inspect the brakes, start by loosening the wheel lug nuts and raising the vehicle. Remove the caliper and visually inspect the disc surface for damage. Check the disc run out and thickness with a dial indicator. Reverse the removal steps for installation and make sure to tighten the caliper guide pin bolts and lug nuts.

To inspect the brake disc, loosen the wheel lug nuts, raise and support the vehicle on jackstands, and remove the wheel. Reinstall the lug nuts to hold the disc in place, and if working on the rear brake disc, release the parking brake. Remove the brake caliper and pads, but avoid disconnecting the brake hose from the caliper to avoid bleeding the brakes later. Suspend the caliper out of the way with wire. Visually inspect the disc surface for score marks and other damage, addressing deep scoring by removing and refinishing the disc. Check for disc run-out with a dial indicator, and if it exceeds the allowable limit, refinish the disc. The disc should be resurfaced regardless of the indicator reading to ensure a smooth and flat surface, eliminating pulsation. Check the disc thickness with a micrometer to ensure it meets the minimum allowable thickness.