Make sure this part fits

Chrysler 68000669AA Seal-CRANKSHAFT Rear Oil

2007-2010 Chrysler Sebring 68000669AA

Customer Questions & Expert Answers (17)
Mopar 68000669AA Seal-CRANKSHAFT Rear Oil
  • Part Description
    RETAINER And Seal Crankshaft Rear Oil
  • Manufacturer
    Mopar
Make sure this part fits
$90.18 MSRP: $134.00
You Save: $43.82 (33%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number68000669AA
    Part DescriptionRETAINER And Seal Crankshaft Rear Oil
    Item Dimensions6.4 x 5.7 x 0.8 inches
    Item Weight0.90 Pounds
    ConditionNew
    ManufacturerMopar
    SKU68000669AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2010 Chrysler SebringLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68000669AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the old seal be removed for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Carefully pry out the old seal with a hook-type seal tool, avoiding scratches on the crankshaft's seal surface, and note the installation depth and orientation for the new seal.
    Posted by MoparPartsGiant Specialist
    Q:
    What is required to replace the rear main oil seal for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Replacing the rear main oil seal requires the removal of the transaxle and driveplate.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new seal be driven into the bore for the 2010 Chrysler Sebring? Posted by Customer
    A:
    Drive the seal into the bore using a seal driver or a large socket and hammer until it is fully seated, ensuring the socket matches the outside diameter of the seal and that it is pressed into place until it bottoms against the cover flange.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should the seal be pried out for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Use a screwdriver or hook tool to carefully pry out the seal, taking care not to damage the oil pump cover bore or the crankshaft's nose and sealing surface.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the seal be pried out for the 2008 Chrysler Sebring? Posted by Customer
    A:
    Use a screwdriver or hook tool to carefully pry out the seal, ensuring not to damage the oil pump cover bore or the crankshaft's nose and sealing surface.
    Posted by MoparPartsGiant Specialist
    Q:
    How are the rear main seal and housing serviced for the 2008 Dodge Avenger? Posted by Customer
    A:
    The rear main seal and housing are serviced as one complete assembly, which necessitates several special tools.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the process of replacing the rear main oil seal for the 2010 Chrysler Sebring? Posted by Customer
    A:
    The first step is to remove the oil pans and the driveplate.
    Posted by MoparPartsGiant Specialist
    Q:
    What tool should be used to ensure the seal is properly installed for the 2009 Chrysler Sebring? Posted by Customer
    A:
    Use a seal driver to tap the seal into place to ensure it doesn't become tilted.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new seal be installed for the 2013 Dodge Avenger? Posted by Customer
    A:
    Install the seal in the cover with the lip facing inward, using a large socket and hammer to drive it into place squarely, stopping when the front face is at the proper depth. A piece of pipe can be used if a large socket is unavailable.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done to the new seal before installation for the 2014 Dodge Avenger? Posted by Customer
    A:
    Lubricate the inner lip of the new seal with engine oil.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be followed during the procedure for the 2009 Chrysler Sebring? Posted by Customer
    A:
    The outlined procedure should be followed while using the appropriate bolt torque value.
    Posted by MoparPartsGiant Specialist
    Q:
    Why is it important to avoid damaging the seal bore or crankshaft for the 2008 Dodge Avenger? Posted by Customer
    A:
    It is important to avoid scratching, gouging, or distorting the area where the seal fits, as this could lead to an oil leak.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before starting the procedure for the 2009 Dodge Avenger? Posted by Customer
    A:
    It is important to read the procedure carefully before starting.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the seal retainer bolts during installation for the 2010 Dodge Avenger? Posted by Customer
    A:
    Install the seal retainer bolts without fully tightening them.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the process for the 2010 Dodge Avenger? Posted by Customer
    A:
    The first step is to remove the transaxle and then the driveplate.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the seal be pried out for the 2008 Dodge Avenger? Posted by Customer
    A:
    Use a screwdriver or hook tool to carefully pry out the seal, taking care not to damage the oil pump cover bore or the crankshaft's nose and sealing surface.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68000669AA, the Right Choice

To ensure reliability, purchase Mopar part # 68000669AA Seal-CRANKSHAFT Rear Oil. It is sometimes referred to as Chrysler Crankshaft Seal. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68000669AA Seal-CRANKSHAFT Rear Oil. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly