Make sure this part fits

Chrysler 4641856AF Axle Half Shaft Right

2005-2007 Chrysler Town & Country 4641856AF

Customer Questions & Expert Answers (10)
Mopar 4641856AF Axle Half Shaft Right
  • Part Description
    Shaft-Axle Half
  • Position
    Passenger Side
  • Replaces
    4641882AE, 4641882AD, 4641856AD, 4641856AE, 4641882AF
  • Manufacturer
    Mopar
Make sure this part fits
$622.55 MSRP: $948.00
You Save: $325.45 (35%)
Core Charge: $50.00
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4641856AF
    Part DescriptionShaft-Axle Half
    Other NamesAxle Assembly
    Item Dimensions43.6 x 5.5 x 5.6 inches
    Item Weight21.70 Pounds
    PositionPassenger Side
    ConditionNew
    Replaces4641882AE, 4641882AD, 4641856AD, 4641856AE, 4641882AF
    ManufacturerMopar
    SKU4641856AF
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2007 Chrysler Town & Country6 Cyl 3.3L, 6 Cyl 3.8LBase, EX, LX FWD, Limited FWD, Touring FWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4641856AF fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What type of joint is found at the inner ends of the driveaxles for the 2004 Chrysler Town & Country? Posted by Customer
    A:
    The inner ends of the driveaxles are equipped with a "tri-pot" type joint capable of both angular and axial motion.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do after installing the lower shock absorber bolts for the 2006 Dodge Caravan? Posted by Customer
    A:
    Install the track bar bolt and nut but do not tighten them yet.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should you remove the steering knuckle from the outer CV joint of the drive axle for the 2005 Chrysler Town & Country? Posted by Customer
    A:
    Remove the drive axle/hub nut and pull the steering knuckle away from the outer CV joint of the drive axle.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should you support the 2003 Dodge Caravan? Posted by Customer
    A:
    Raise the vehicle and securely support it on jackstands.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do with the rear wheel lug nuts before working on the rear axle assembly for the 2006 Chrysler Town & Country? Posted by Customer
    A:
    Loosen the rear wheel lug nuts.
    Posted by MoparPartsGiant Specialist
    Q:
    What type of joint design is used for the outer CV joints for the 2007 Dodge Caravan? Posted by Customer
    A:
    The outer CV joints use a ball-and-cage design, which is capable of angular but not axial movement.
    Posted by MoparPartsGiant Specialist
    Q:
    Why is regular inspection of CV joint boots important, and what should be checked during these inspections for the 2010 Dodge Grand Caravan? Posted by Customer
    A:
    Regular inspection of CV joint boots is crucial to detect tears and grease leakage. Damaged boots can allow dirt and moisture to enter the CV joints, accelerating bearing wear and causing premature failure. During inspections, look for any signs of tears, damage, or deterioration in the boots. Promptly replace any damaged CV joint boots to prevent potential CV joint damage.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the inner end of the CV joint from the differential for the 2000 Dodge Grand Caravan? Posted by Customer
    A:
    Pry it out with a large screwdriver or pry bar.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be disconnected from the axle assembly for the 1998 Dodge Grand Caravan? Posted by Customer
    A:
    Disconnect the lower ends of the shock absorbers and the track bar.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4641856AF, the Right Choice

To ensure reliability, purchase Mopar part # 4641856AF Axle Half Shaft Right. It is sometimes referred to as Chrysler Axle Shaft. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4641856AF Axle Half Shaft Right. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly