Chrysler 5006206AA Rear Leaf Spring

You can Select Your Vehicle to check if 5006206AA fits your vehicle.

To remove the leaf spring, lift up the vehicle, support the axle using a jack stand, and remove the shock absorber bolt. Just lift up the axle slightly, untighten the axle plate bolts and lower down the axle. Take out front spring mount bolts, rear spring shackle nuts and plate. Remove spring and pivot bolt. To install, bolt on front spring mount; put in place pivot bolt; raise up spring. Install rear spring onto shackle with spring mount bolts. Place leaf spring isolator then lift up axle before installing axle plate bolts. Lower vehicle as you install shock absorber bolts and tighten all components firmly.

To install the leaf spring, assemble the front spring mount to the front of the spring eye and install the pivot bolt and nut. Raise the front of the spring and install the spring mount bolts, tightening them securely. Install the rear of the spring onto the rear spring shackle and install the shackle plate, but do not tighten the nuts yet. Position the lower leaf spring isolator and raise the axle assembly into position with the axle centered under the spring locator post. Install the axle plate bolts and tighten them. Finally, install the shock absorber bolts, lower the vehicle to the floor with the full weight on the wheels, and tighten all components.