Make sure this part fits

Chrysler 4686045AD Starter Motor

2004-2006 Chrysler 4686045AD

Customer Questions & Expert Answers (8)
Mopar 4686045AD Starter Motor
  • Part Description
    Starter-Engine
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number4686045AD
    Part DescriptionStarter-Engine
    Other NamesStarter
    Item Dimensions6.5 x 6.4 x 10.5 inches
    Item Weight8.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4686045AD
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2004-2006 Chrysler Pacifica6 Cyl 3.5L, 6 Cyl 3.8LBase AWD, Base FWD, Limited AWD, Limited FWD, Touring AWD, Touring FWD
    2004-2005 Chrysler Town & Country6 Cyl 3.3L, 6 Cyl 3.8LBase, EL, EX, Limited AWD, Limited FWD, LX FWD, LXi FWD, Touring AWD, Touring FWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4686045AD fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How to Remove and Install a Starter Motor on Chrysler Town & Country? Posted by Customer
    A:
    Disconnect the battery and solenoid cables, then remove the starter mounting bolts. Raise the vehicle and remove the B+ cable and solenoid connector. Remove the starter and spacer, and install in reverse. Don't forget the spacer and to tighten the bolts.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you disconnect the cable from the negative terminal of the battery for the 2013 Dodge Grand Caravan? Posted by Customer
    A:
    Disconnect the cable from the negative terminal of the battery.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Starter Motor
    Q:
    How do you remove the starter motor mounting bolts for the 2005 Dodge Caravan? Posted by Customer
    A:
    Remove the starter motor mounting bolts, then remove the starter assembly.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the starter turns over slowly for the 2004 Chrysler Town & Country? Posted by Customer
    A:
    Perform a cranking voltage and current draw test with the starter assembly on the engine. The battery voltage should not drop below 8.0 volts (manual transaxle) or 8.5 volts (automatic transaxle) during cranking, and the current draw should be between 250-400 amps. If values are off, replace the starter.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Starter Motor
    Q:
    What should be done if the starting circuit malfunctions for the 2007 Dodge Caravan? Posted by Customer
    A:
    Check the battery cable clamps for cleanliness and tightness, inspect the battery cables, and test the battery's condition. Examine the starter solenoid wiring and connections, ensure starter mounting bolts are tight, and verify the ignition switch circuit's correct operation. Check the Transmission Range switch (automatic transaxle) or clutch start switch (manual transaxle) and their adjustments. Also, test the starter relay located in the fuse/relay box in the engine compartment.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Starter Motor
    Q:
    How do you remove the starter motor and solenoid for the 1999 Dodge Grand Caravan? Posted by Customer
    A:
    Start by detaching the cable from the negative terminal of the battery. Then, remove the upper mounting bolt and nut from above. Next, raise the vehicle and support it securely on jackstands. Disconnect the wires from the terminals on the starter motor and solenoid by removing the two nuts. After that, remove the lower mounting bolt and detach the starter.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Starter Motor
    Q:
    What should be done to check the solenoid for the 2016 Dodge Grand Caravan? Posted by Customer
    A:
    Connect a jumper lead between the battery (+) and the ignition switch wire terminal on the solenoid.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Starter Motor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4686045AD, the Right Choice

To ensure reliability, purchase Mopar part # 4686045AD Starter Motor. It is sometimes referred to as Chrysler Starter Motor. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler Pacifica, Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4686045AD Starter Motor. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly