Make sure this part fits

Chrysler 53021572AF Hydraulic Roller Lifter

2005-2015 Chrysler 53021572AF

Customer Questions & Expert Answers (33)
Mopar 53021572AF Hydraulic Roller Lifter
  • Part Description
    Tappet-Hydraulic Roller
  • Replaced By
    5038787AD
  • Manufacturer
    Mopar
Make sure this part fits
$78.75 MSRP: $105.00
You Save: $26.25 (25%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number53021572AF
    Part DescriptionTappet-Hydraulic Roller
    Item Dimensions3.7 x 2.6 x 1.9 inches
    Item Weight0.80 Pounds
    ConditionNew
    ManufacturerMopar
    SKU53021572AF
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2015 Chrysler 3008 Cyl 5.7L, 8 Cyl 6.1LC AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C Platinum RWD, C RWD, C SRT8 RWD, S AWD, S Luxury Series RWD, S RWD, S V8 AWD, S V8 RWD, Touring RWD
    2007-2009 Chrysler Aspen8 Cyl 5.7LLimited 2WD, Limited 4WD, Limited HEV 4WD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 53021572AF fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the valve spring compressor be mounted for the 2006 Chrysler 300? Posted by Customer
    A:
    On the cylinder head.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed in the early stages of removal for the 2010 Chrysler 300? Posted by Customer
    A:
    In the early stages of removal, you should remove the timing chain cover, timing chain, and sprockets.
    Posted by MoparPartsGiant Specialist
    Q:
    What precautions should be taken during installation to prevent damage to the rocker arms for the 2006 Chrysler 300? Posted by Customer
    A:
    When installing the rocker arms and pedestals in their previously marked order, keep the intake rockers on the intake shaft and exhaust rockers on the exhaust shaft, ensuring that the notches in the rocker arm shafts face upward when assembled to prevent damage to the rocker arms.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What should be done regarding the air conditioning system and final checks for the 2009 Dodge Ram 2500? Posted by Customer
    A:
    Finally, have the air conditioning system evacuated, recharged, and leak-tested by a professional shop.
    Posted by MoparPartsGiant Specialist
    Q:
    What precautions should be taken during installation to prevent damage to the rocker arms for the 2008 Dodge Charger? Posted by Customer
    A:
    When installing the rocker arms and pedestals in their previously marked order, keep the intake rockers on the intake shaft and exhaust rockers on the exhaust shaft, ensuring that the notches in the rocker arm shafts face upward when assembled to prevent damage to the rocker arms.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the final steps after component installation for the 2010 Dodge Charger? Posted by Customer
    A:
    Follow the reverse order of the removal steps, including changing the oil and installing a new oil filter, filling the cooling system, checking for oil pressure and leaks, and breaking in new components if necessary. Change the oil and filter again after 500 miles of operation.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the installation process be conducted for the 2011 Dodge Challenger? Posted by Customer
    A:
    Installation is the reverse of removal, with the exception that the lash adjuster should be installed first, ensuring they are at least partially full of oil, indicated by little or no plunger travel.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What steps should be taken after removing the camshaft for the 2015 Dodge Challenger? Posted by Customer
    A:
    After removing the camshaft, clean it and inspect the bearing journals for wear or damage. If the journals are damaged, both the camshaft and bearings may need to be replaced. Measure the bearing journals and cam lobe heights to check for excessive wear, and inspect the camshaft lobes for discoloration and wear.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before removing the rocker arms and lash adjusters for the 2007 Dodge Charger? Posted by Customer
    A:
    Label and store them separately, so they can be reinstalled on the same valve they were removed from.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What should be done after removing the camshaft for the 2007 Dodge Durango? Posted by Customer
    A:
    After removal, clean the camshaft and inspect the bearing journals for wear or damage, measuring them with a micrometer.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after completing the installation for the 2008 Dodge Challenger? Posted by Customer
    A:
    Complete the installation in reverse order of removal and check for oil leaks after starting the engine.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be inspected on each rocker arm for the 2004 Dodge Durango? Posted by Customer
    A:
    Inspect each rocker arm for wear, cracks, and damage, ensuring the rollers turn freely, and check the lash adjuster contact surfaces for wear or damage, confirming they move freely without excessive play.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What should be assessed during the inspection of the lifters for the 2005 Dodge Magnum? Posted by Customer
    A:
    During the inspection of the lifters, assess the lifter walls, pushrod seats, and foot for damage. Check the rollers on roller lifters for wear, damage, and excessive play.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be inspected during the removal process for the 2006 Dodge Magnum? Posted by Customer
    A:
    Carefully examine each rocker arm for wear, cracks, and other damage, paying attention to the steel roller tips and hydraulic lash adjusters. Confirm that the rollers move freely without signs of wear and check the lash adjuster contact surfaces for any wear or damage.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What components need to be removed initially to access the camshaft and tappets for the 2009 Dodge Ram 3500? Posted by Customer
    A:
    Begin by removing the crankshaft damper and gear housing cover, followed by the radiator, upper radiator support panel, intercooler, and air conditioning condenser. If you opt for Method Two for tappet retention, remove the fuel transfer pump, fuel filter/water separator, and fuel injection pump.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the rocker arms for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    Pull out the lash adjusters and store them with the corresponding rocker arm.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What should be done before removing the rocker arms and lash adjusters for the 2007 Dodge Magnum? Posted by Customer
    A:
    Label and store them separately, so they can be reinstalled on the same valve they were removed from.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be checked on the lifters for the 2009 Dodge Ram 3500? Posted by Customer
    A:
    Clean the lifters and check for scuffing and wear on the lifter walls, pushrod seats, and roller lifters.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done before installing the lash adjusters for the 2012 Ram 2500? Posted by Customer
    A:
    Ensure they are partially full of oil.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be done after removing those components for the 2009 Dodge Ram 2500? Posted by Customer
    A:
    Remove the cylinder heads and radiator.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the engine be prepared for tappet removal for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    Position the engine at TDC (Top Dead Center) for cylinder number 1, then proceed to remove the valve cover, rocker arms, and pushrods.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the rocker arms for the 2009 Dodge Ram 3500? Posted by Customer
    A:
    Pull out the lash adjusters and store them with the corresponding rocker arm.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What should be done first in the procedure for the 2018 Ram 1500? Posted by Customer
    A:
    Remove the valve cover(s).
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed before taking out the camshaft for the 2015 Ram 2500? Posted by Customer
    A:
    The timing chain cover, timing chain, phaser, and oil pump.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What initial preparations should be made before starting the camshaft and tappet replacement process for the 2012 Ram 1500? Posted by Customer
    A:
    Before starting, if the vehicle is equipped with air conditioning and you plan to remove the camshaft with the engine in place, have the air conditioning system discharged by a professional.
    Posted by MoparPartsGiant Specialist
    Q:
    What needs to be done if new lifters are being installed for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    A new camshaft must also be installed.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the steps for reassembly after camshaft and tappet installation for the 2012 Ram 2500? Posted by Customer
    A:
    Remove all tappet retaining dowels or clamps and proceed with the reassembly of pushrods, rocker arms, and other components. Adjust the valve clearance and complete the installation process, including changing the engine oil and filter. If the side cover was removed, install it with a new gasket.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after that for the 2016 Ram 1500? Posted by Customer
    A:
    Drain the cooling system.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    How should the engine be prepared for tappet removal for the 2014 Ram 3500? Posted by Customer
    A:
    Position the engine at TDC (Top Dead Center) for cylinder number 1, then proceed to remove the valve cover, rocker arms, and pushrods.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What should be inspected on the camshaft for the 2015 Ram 3500? Posted by Customer
    A:
    Check the bearing journals for wear and damage, measure the lobe height of each cam lobe, and check for discoloration, score marks, and uneven wear on the lobes.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done first in the procedure for the 2014 Ram 3500? Posted by Customer
    A:
    Remove the valve cover(s).
    Posted by MoparPartsGiant Specialist
    Q:
    Which rocker arms should be removed on the 2009 Dodge Ram 2500? Posted by Customer
    A:
    Remove the rocker arms from cylinders 2, 6, 1, 3, and 5.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 53021572AF, the Right Choice

To ensure reliability, purchase Mopar part # 53021572AF Hydraulic Roller Lifter. It is sometimes referred to as Chrysler Lash Adjuster. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Chrysler 300, Aspen models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 53021572AF Hydraulic Roller Lifter. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly