Make sure this part fits

Jeep P0009006EB Headlamp Bulb

2002-2010 Jeep P0009006EB

Customer Questions & Expert Answers (10)
Mopar P0009006EB Headlamp Bulb
  • Part Description
    Bulb-Headlamp/Eco Bright 9006
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part NumberP0009006EB
    Part DescriptionBulb-Headlamp/Eco Bright 9006
    Item Dimensions6.8 x 3.2 x 1.5 inches
    Item Weight0.50 Pounds
    ConditionNew
    ManufacturerMopar
    SKUP0009006EB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2005-2010 Jeep Grand Cherokee6 Cyl 3.0L Diesel, 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L, 8 Cyl 6.1LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, SRT8 4WD
    2002-2007 Jeep Liberty4 Cyl 2.4L, 4 Cyl 2.8L Diesel, 6 Cyl 3.7LLimited Edition 2WD, Limited Edition 4WD, Renegade 2WD, Renegade 4WD, Sport 2WD, Sport 4WD
  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck ? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if P0009006EB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the process for replacing tail, stop, back-up, and turn signal bulbs for the 1996 Chrysler Cirrus? Posted by Customer
    A:
    Open the trunk, separate the trunk lining from the rear tail lamp assembly, unscrew and remove the plastic wing-nuts securing the tail light assembly, withdraw it from the quarter panel, disconnect the wiring harness, rotate the bulb holder 1/4-turn counterclockwise to withdraw it from the light bezel, pull the bulb from the holder, and reinstall in reverse order.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How should the 2010 Chrysler PT Cruiser be supported during the bulb replacement process? Posted by Customer
    A:
    Raise the vehicle and support it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How are the headlights different in the 2010 Chrysler Sebring? Posted by Customer
    A:
    On Dodge models, the headlights use a dual headlamp bulb. On Chrysler models, a "quad system" is used, with one bulb for high beam and one bulb for low beam.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What precaution should be taken while handling the bulb for the 2008 Dodge Avenger? Posted by Customer
    A:
    You should be careful not to touch the surface of the bulb with your fingers because the oil from your skin could cause it to overheat and fail prematurely.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What type of headlight bulbs are used in Chrysler 300C 2009 Dodge Charger? Posted by Customer
    A:
    The low-beam headlight bulbs in Chrysler 300C Models are HID bulbs.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What does the procedure simplify for the 2009 Dodge Durango? Posted by Customer
    A:
    The procedure simplifies headlight bulb replacement by demonstrating how to replace a headlight bulb without removing the headlight housing.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you remove the bulb on the 2010 Dodge Ram 2500? Posted by Customer
    A:
    Rotate the bulb counter clockwise to remove it.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you remove the bulb on the 2009 Dodge Ram 3500? Posted by Customer
    A:
    Rotate the bulb counter clockwise to remove it.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you remove the bulb housing on the 2017 Ram 1500? Posted by Customer
    A:
    Twist the bulb housing counterclockwise to remove it.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Headlight Bulb
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part P0009006EB, the Right Choice

To ensure reliability, purchase Mopar part # P0009006EB Headlamp Bulb. It is sometimes referred to as Jeep Headlight Bulb. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Grand Cherokee, Liberty models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar P0009006EB Headlamp Bulb. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly