×
- Live Chat
- 1-888-511-3595
My Garage
My Account
Cart
Genuine Chrysler PT Cruiser Headlight Bulb
Headlamp Bulb- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Headlight Bulbs found
Chrysler PT Cruiser Headlight Bulb
Headlight bulbs are mainly used in Chrysler PT Cruiser cars through they are used for lighting the road in order to enhance road visibility mostly at night. These automobiles have used different types of headlight bulbs namely Halogen, and HID (High Intensity Discharge) bulbs in the past years. Halogen bulbs, which have a tungsten filament, as the bulb gets older, it gets gradually dimmer, while HID bulbs on the other hand generate light from an arc between electrodes of ignite xenon or metal halide gas but these too can fade and cycle. Another part that may be very useful especially at night is the Halogen bulbs with one getting up to 50% of more brightness and a wider side-to-side view in comparison to the factory ones. However, headlight conversion kits that use LED bulbs provide better light and are more durable than halogen bulbs resulting in a wider beam without dazzling other driver in the oncoming traffic. These LED headlight bulbs are easy to install and can also be used as the last headlight bulbs for the Chrysler PT Cruiser, so them can be right for drivers in search of durable devices.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler PT Cruiser Headlight Bulb at great affordable prices. Moreover, all genuine Chrysler PT Cruiser Headlight Bulb come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler PT Cruiser Headlight Bulb Parts Questions & Experts Answers
- Q: How do you replace the headlight and park/turn signal bulbs on Chrysler PT Cruiser?A: On these models, the Headlight high and low beam and park/turn signal bulbs are separate and mounted in the headlight housing. Begin by loosening the front wheel lug nuts, then raise the vehicle and support it securely on jackstands. Remove the wheel and detach the headlight access panel from the fenderwell splash shield by rotating it out of the fenderwell. Grasp the appropriate bulb holder, rotate it counterclockwise, and remove it from the headlight housing. The headlight bulbs are integral with the holder and replaced as a unit; unplug the electrical connector and connect it to the new bulb, taking care not to touch the bulb surface with your fingers to avoid overheating and premature failure. If the bulb surface is touched, clean it with rubbing alcohol. For park/turn signals, grasp the bulb and pull it out of the holder, then using gloves or a clean shop towel, insert the new bulb into the holder. Install the bulb and holder in the headlight housing, rotating it clockwise to lock it in place. Finally, install the headlight access panel, then the wheel and lug nuts, tightening the lug nuts to the specified torque.
