Make sure this part fits

Jeep E0015031 Front Catalytic Converter With Pipes

1984-1986 Jeep E0015031

Customer Questions & Expert Answers (5)
Mopar E0015031 Front Catalytic Converter With Pipes
  • Part Description
    Converter, Catalytic W/Pipes - Front
  • Position
    Front
  • Replaces
    E0015138, E0015181
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part NumberE0015031
    Part DescriptionConverter, Catalytic W/Pipes - Front
    Item Dimensions18.4 x 12.2 x 8.2 inches
    Item Weight5.70 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesE0015138, E0015181
    ManufacturerMopar
    SKUE0015031
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1984-1986 Jeep Cherokee6 Cyl 2.8L
    1986 Jeep Comanche6 Cyl 2.8L
    1984-1986 Jeep Grand Wagoneer6 Cyl 4.2L, 8 Cyl 5.9L
    1984-1986 Jeep J106 Cyl 4.2L, 8 Cyl 5.9L
    1984-1986 Jeep J206 Cyl 4.2L, 8 Cyl 5.9L
    1984-1986 Jeep Wagoneer6 Cyl 2.8L
    1984-1986 Jeep Wrangler6 Cyl 4.2L
  • Customer Questions & Expert Answers

    Q:
    Please cross check for fit. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if E0015031 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What Is the Maintenance Required for a Catalytic Converter on Dodge Daytona? Posted by Customer
    A:
    The catalytic converter reduces hydrocarbon and carbon monoxide pollutants in exhaust gases. It should be inspected for damage, cracks, and missing fasteners. When replacing, the exhaust system should be cool and new gaskets should be used. Penetrating oil should be applied to the clamp bolts and the nuts should be tightened to the specified torque. After installation, the engine should be started and checked for exhaust leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the recommended action for replacing a catalytic converter due to a federally mandated extended warranty on Jeep Comanche? Posted by Customer
    A:
    Due to a Federal warranty covering emissions-related parts like the catalytic converter, it's advised to consult a dealer before replacing it yourself. The converter, an emission control device, comes in two types: the oxidation catalyst and the three-way catalyst. If you suspect malfunction, take it to a dealer or authorized facility for diagnosis. Check the converter for leaks, corrosion, or dents when servicing under body parts. If damaged, replace it. Use a vacuum gauge to diagnose plugged converters by checking for blocked exhaust. If pressure doesn't significantly increase, the exhaust system or converter may be blocked.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the catalytic converter be removed and replaced for the 1984 Chrysler Laser? Posted by Customer
    A:
    If component replacement is necessary, it is important to wait until the complete exhaust system is cool before attempting to remove the catalytic converter. The vehicle should be raised and securely supported on jackstands, and penetrating oil should be applied to the clamp bolts. After several minutes, the bolts and rubber hangers can be removed, and the converter can be separated from the exhaust pipe. Any old gaskets stuck to the pipes should be removed. During installation, new exhaust pipe gaskets should be used, and the clamp nuts should be tightened to the specified torque. Finally, the engine should be started and carefully checked for exhaust leaks.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Catalytic Converter
    Q:
    What is a catalytic converter for the 2008 Dodge Grand Caravan? Posted by Customer
    A:
    A catalytic converter is an emission control device that reduces pollutants in the exhaust gas stream. There are two types of converters: the conventional oxidation catalyst and the three-way catalyst.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Catalytic Converter
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part E0015031, the Right Choice

To ensure reliability, purchase Mopar part # E0015031 Front Catalytic Converter With Pipes. It is sometimes referred to as Jeep Catalytic Converter, Jeep Exhaust Pipe. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Cherokee, Comanche, Wrangler models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar E0015031 Front Catalytic Converter With Pipes. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly