Make sure this part fits

Jeep 5038398AC Pump-Engine Oil

2014 Jeep Grand Cherokee 5038398AC

Customer Questions & Expert Answers (13)
Mopar 5038398AC Pump-Engine Oil
  • Part Description
    Pump Engine Oil
  • Replaced By
    5038398AE
  • Manufacturer
    Mopar
Make sure this part fits
$289.30 MSRP: $443.00
You Save: $153.70 (35%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number5038398AC
    Part DescriptionPump Engine Oil
    Item Dimensions10.3 x 6.4 x 6.6 inches
    Item Weight4.10 Pounds
    ConditionNew
    ManufacturerMopar
    SKU5038398AC
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2014 Jeep Grand Cherokee8 Cyl 6.4LLimited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, SRT AWD, Summit AWD, Summit RWD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5038398AC fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps are involved in the removal of the oil pump for the 2018 Ram 2500? Posted by Customer
    A:
    Disconnect the cable from the negative terminal of the battery. Remove the timing chain cover. Remove the oil pan. Remove the pick-up tube and the oil pump mounting bolts and detach the pump from the engine block.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps are involved in removing the oil pump timing gear splash shield for the 2016 Dodge Challenger? Posted by Customer
    A:
    Remove the oil pump timing gear splash shield bolts and the splash shield, then press the oil pump chain tensioner away from the chain to insert a 3 mm Allen wrench into the housing.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in installing the oil pump for the 2013 Dodge Challenger? Posted by Customer
    A:
    Prime the oil pump by filling the housing with engine oil.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final step in the installation process for the 2010 Dodge Challenger? Posted by Customer
    A:
    For installation, align the flats in the rotor with the flats on the crankshaft, install the pump-to-block bolts, and tighten them to the specified torque, completing the process by reversing the removal steps.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pump
    Q:
    What final steps should be taken after the installation is complete for the 2015 Dodge Challenger? Posted by Customer
    A:
    Fill the crankcase with the appropriate type and quantity of engine oil, change the oil filter, refill the cooling system, run the engine, and check for oil pressure and leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the oil pressure relief valve is removed from the housing for the 2011 Ram 3500? Posted by Customer
    A:
    If the oil pressure relief valve is removed from the housing, the entire oil pump assembly must be replaced with a new unit.
    Posted by MoparPartsGiant Specialist
    Q:
    What initial preparations should be made before attempting to remove the oil pump for the 2018 Ram 2500? Posted by Customer
    A:
    Before removing the oil pump, you should start by disconnecting the cable from the negative terminal of the battery. Then, raise the front of the vehicle and support it securely on jackstands. Additionally, drain the engine oil and remove the skid plate and lower splash shield.
    Posted by MoparPartsGiant Specialist
    Q:
    What caution should be taken when removing the oil pressure relief valve and spring for the 2015 Ram 2500? Posted by Customer
    A:
    Removal of the relief valve and spring from the oil pump housing will damage the oil pump and require replacement of the entire oil pump assembly.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the original pump is being reused for the 2014 Ram 3500? Posted by Customer
    A:
    Fill the pump cavity with engine oil and reinstall the back cover, then install the pump assembly in the gear case and tighten the mounting bolts to the torque.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pump
    Q:
    What are the steps for installing the oil pump for the 2015 Ram 3500? Posted by Customer
    A:
    To install the oil pump, place it onto the engine block using the aligning dowels and tighten the mounting bolts. Slide the oil pump chain tensioner onto the pivot and insert an Allen wrench to hold it in place. Install the oil pump timing chain gear and tighten the mounting bolt. Maneuver the oil pump solenoid into position and insert it through the block opening. Install the timing gear splash shield and bolts.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the oil pump housing be removed from the engine for the 2017 Ram 3500? Posted by Customer
    A:
    Gently pry the oil pump housing outward enough to clear the flats on the crankshaft and remove it from the engine.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the components for the 2012 Ram 2500? Posted by Customer
    A:
    Remove the components, clean them with solvent and dry them thoroughly.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Oil Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 5038398AC, the Right Choice

To ensure reliability, purchase Mopar part # 5038398AC Pump-Engine Oil. It is sometimes referred to as Jeep Oil Pump. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Grand Cherokee models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 5038398AC Pump-Engine Oil. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly