Make sure this part fits

Jeep 53021728BB Hydraulic Engine Lifters And Yoke

2010-2011 Jeep 53021728BB

Customer Questions & Expert Answers (16)
Mopar 53021728BB Hydraulic Engine Lifters And Yoke
  • Part Description
    TAPPET-Hydraulic
  • Replaced By
    5038786AD
  • Manufacturer
    Mopar
Make sure this part fits
$252.50 MSRP: $338.00
You Save: $85.50 (26%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number53021728BB
    Part DescriptionTAPPET-Hydraulic
    Item Dimensions7.8 x 3.9 x 4.0 inches
    Item Weight1.90 Pounds
    ConditionNew
    ManufacturerMopar
    SKU53021728BB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010 Jeep Commander8 Cyl 5.7LLimited 2WD, Limited 4WD, Sport 2WD, Sport 4WD
    2010-2011 Jeep Grand Cherokee8 Cyl 5.7LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 53021728BB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the valve spring compressor be mounted for the 2008 Chrysler 300? Posted by Customer
    A:
    On the cylinder head.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed in the early stages of removal for the 2007 Chrysler 300? Posted by Customer
    A:
    In the early stages of removal, you should remove the timing chain cover, timing chain, and sprockets.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the removal process for the 2007 Chrysler 300? Posted by Customer
    A:
    First, remove the valve cover(s).
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    How should the rocker arms and pedestals be prepared for removal for the 2006 Dodge Charger? Posted by Customer
    A:
    Mark the rocker arms and pedestals for proper identification.
    Posted by MoparPartsGiant Specialist
    Q:
    What special tool is required for this procedure for the 2007 Dodge Charger? Posted by Customer
    A:
    A universal shaft-type valve spring compressor.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    How should the valve spring compressor be used for the 2010 Dodge Challenger? Posted by Customer
    A:
    Mount the valve spring compressor on the cylinder head and depress the valve spring just enough to relieve tension on the rocker arm, allowing for its removal.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What precautions should be taken when removing and handling the lifters for the 2009 Dodge Charger? Posted by Customer
    A:
    When removing and handling the lifters, ensure they are placed back into the same lifter bore and in the same direction. Mark each lifter and lifter rail for identification.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be checked for wear during the inspection for the 2010 Dodge Challenger? Posted by Customer
    A:
    Check the pivot area and shaft for wear, and if any components are damaged, replace them.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the initial steps to take before replacing the camshaft for the 2013 Dodge Challenger? Posted by Customer
    A:
    Begin by relieving the fuel system pressure and disconnecting the cable from the negative terminal of the battery. For 2015 and later models with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first. Then, drain the cooling system.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the engine be rotated for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    Rotate the engine clockwise until the pistons are positioned correctly.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What components need to be removed before taking out the camshaft for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    The timing chain cover, timing chain, phaser, and oil pump.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed initially to access the camshaft and tappets for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    Begin by removing the crankshaft damper and gear housing cover, followed by the radiator, upper radiator support panel, intercooler, and air conditioning condenser. If you opt for Method Two for tappet retention, remove the fuel transfer pump, fuel filter/water separator, and fuel injection pump.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the new camshaft and tappets be installed for the 2016 Ram 1500? Posted by Customer
    A:
    For camshaft and tappet installation, a special tappet installation tool is required to seat the new tappets into their bores before inserting the camshaft. Lubricate the camshaft thoroughly and insert it into the block, aligning timing marks on the camshaft gear and crankshaft gear. Secure the camshaft thrust plate bolts, ensuring the camshaft is not pushed too far into the block.
    Posted by MoparPartsGiant Specialist
    Q:
    How can the lifters be extracted from the lifter bores for the 2015 Ram 1500? Posted by Customer
    A:
    Remove the lifter rail mounting bolts and use a special tool or magnet to extract the lifters.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What should be done after removing the rocker arms and lash adjusters for the 2018 Ram 1500? Posted by Customer
    A:
    Inspect them for wear, cracks, and damage.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 53021728BB, the Right Choice

To ensure reliability, purchase Mopar part # 53021728BB Hydraulic Engine Lifters And Yoke. It is sometimes referred to as Jeep Lash Adjuster. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Commander, Grand Cherokee models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 53021728BB Hydraulic Engine Lifters And Yoke. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly