Make sure this part fits

Jeep 68060714AA Hydraulic Engine Lifters And Yoke

2009 Jeep 68060714AA

Customer Questions & Expert Answers (9)
Mopar 68060714AA Hydraulic Engine Lifters And Yoke
  • Part Description
    TAPPET-Hydraulic
  • Replaced By
    5038785AD
  • Manufacturer
    Mopar
Make sure this part fits
$222.20 MSRP: $338.00
You Save: $115.80 (35%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number68060714AA
    Part DescriptionTAPPET-Hydraulic
    Item Dimensions8.2 x 3.7 x 4.0 inches
    Item Weight2.00 Pounds
    ConditionNew
    ManufacturerMopar
    SKU68060714AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009 Jeep Commander8 Cyl 5.7LLimited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Sport 2WD, Sport 4WD
    2009 Jeep Grand Cherokee8 Cyl 5.7LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD
  • Customer Questions & Expert Answers

    Q:
    Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68060714AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the rocker arms and lash adjusters for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    Label and store them separately.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What should be checked for wear during the inspection for the 2012 Dodge Challenger? Posted by Customer
    A:
    Check the pivot area and shaft for wear, and if any components are damaged, replace them.
    Posted by MoparPartsGiant Specialist
    Q:
    What specific considerations are there for the 2012 Dodge Challenger? Posted by Customer
    A:
    For 6.4L engines with MOS, it is important to ensure that the correct deactivating roller lifters are used in specific cylinders.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for removing rocker arms from the 2006 Dodge Durango? Posted by Customer
    A:
    Remove rocker arms from cylinders No. 2 and 8, then No. 3 and 5, followed by No. 4 and 6, and finally No. 1 and 7.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    How should the camshaft be lubricated before installation for the 2005 Dodge Durango? Posted by Customer
    A:
    Lubricate the camshaft bearing journals and lobes with installation lube before gently sliding the camshaft into the engine, taking care not to damage the bearings.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the alternative to using the valve spring compressor for the 2015 Dodge Challenger? Posted by Customer
    A:
    The only alternative involves major disassembly of the engine and surrounding components by removing the timing chains and camshafts.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What steps should be followed to install the camshaft for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    Slide the camshaft into the engine, install the camshaft thrust plate, install the timing chain and sprockets, lubricate the lifters, and install them in the block.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the two methods for retaining the tappets during camshaft removal, and how are they implemented for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    For tappet retention using Method One, you'll need wooden dowels to secure the tappets in their bores. Insert the dowels through the pushrod holes and secure them with rubber bands to keep the tappets raised. In Method Two, you'll use small hose clamps to retain the tappets at the top of their bores.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 68060714AA, the Right Choice

To ensure reliability, purchase Mopar part # 68060714AA Hydraulic Engine Lifters And Yoke. It is sometimes referred to as Jeep Lash Adjuster. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Commander, Grand Cherokee models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 68060714AA Hydraulic Engine Lifters And Yoke. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly