Make sure this part fits

Jeep 4884594AK Valve Tappet

2007-2017 Jeep 4884594AK

Customer Questions & Expert Answers (7)
Mopar 4884594AK Valve Tappet
  • Part Description
    Tappet Valve See Note
  • Manufacturer
    Mopar
Make sure this part fits
$3.92 MSRP: $5.90
You Save: $1.98 (34%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number4884594AK
    Part DescriptionTappet Valve See Note
    Other NamesValve Lifter
    Item Dimensions2.9 x 1.8 x 1.9 inches
    Item Weight0.50 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4884594AK
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2017 Jeep Compass4 Cyl 2.0L, 4 Cyl 2.4LBase 4WD, Base FWD, Latitude 4WD, Latitude FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD
    2016-2017, 2014, 2010, 2007-2008 Jeep Patriot4 Cyl 2.0L, 4 Cyl 2.4LBase 4WD, Base FWD, Latitude 4WD, Latitude FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD
  • Customer Questions & Expert Answers

    Q:
    This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4884594AK fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Q:
    How to remove and install Lash Adjuster and Rocker Arm in 2.7L V6 engine on Dodge Avenger? Posted by Customer
    A:
    Major disassembly of the engine and surrounding components by removing the timing chains and camshaft is an option but a universal shaft-type valve spring compressor is used in this procedure instead. Start by selecting Park or engaging the parking brake or chocking the drive wheels and immobilizing the ignition by removing the leads from the ignition coils and removing spark plugs. Third, one should take out the upper intake manifold and the valve cover(s). Turn the engine with a socket and ratchet that is fitted at the crankshaft pulley bolt until a specific cam lobe of the rocker arm to be removed is situated at its base circle with an anti-clock wise turning of the crankshaft. In case of removal of rocker arms and lash adjusters, it is very important to label and place them where they can easily be fixed back into place. Take the valve spring compressor and put it over the cylinder head and only compress the spring enough to allow, you release tension on the rocker arm and pulling the arm out. To replace or remove all rocker arms or lash adjusters, begin at cylinder number one, memorizing your sequence by working on one cylinder at a time, also since the firing order is sequential, harmonize the rocker arm and lash adjuster for each valve. When the rocker arms have been pulled out, the direction of the lash adjusters can be pulled out of the cylinder head and placed with the related rocker arm. Examine each rocker arm for wear, cracks and other defects, including in particular the movement of the rollers, and the state of the pivot point. Moreover, check the lead-in end of the lash adjuster contact surfaces for wear and or damage and ensure that the lash adjuster moves smoothly in its bore with no heavy side way movement. Installation is the converse of removal, though one additional rule should apply: the lash adjuster should be full of oil when installed, preferably to the extent that there should be very little or no travel outward on the reflux plunger.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be inspected on the rocker arms and lash adjusters for the 2013 Chrysler 200? Posted by Customer
    A:
    Inspect each rocker arm for wear, cracks, and other damage, ensuring the rollers turn freely and checking the pivot area for any issues. Also, inspect the lash adjuster contact surfaces for wear or damage, confirming that the lash adjusters move freely in their bores without excessive side-to-side play.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    How should the axle for the roller tip be checked for the 2009 Chrysler Sebring? Posted by Customer
    A:
    Ensure the axle for the roller tip is properly aligned and check for wear on the hydraulic lash adjuster-to-valve stem tip contact surface.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the rocker arm assemblies be installed for the 2017 Chrysler 200? Posted by Customer
    A:
    Install the rocker arm assemblies with the valvetrain in a no-load situation by aligning the camshaft and crankshaft sprockets for TDC number 1, then tighten the right side rocker arm assembly bolts in the proper sequence before installing and tightening the left rocker arm assembly bolts.
    Posted by MoparPartsGiant Specialist
    Q:
    What components need to be removed before accessing the rocker arms for the 2008 Chrysler Sebring? Posted by Customer
    A:
    The upper intake manifold and the valve cover(s) need to be removed.
    Posted by MoparPartsGiant Specialist
    See expert answers on similar Lash Adjuster
    Q:
    What should be done if rocker arms or pedestals were removed for the 2011 Dodge Avenger? Posted by Customer
    A:
    Lubricate the shafts and reinstall them in their marked order, keeping intake rockers on the intake shaft and exhaust rockers on the exhaust shaft.
    Posted by MoparPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4884594AK, the Right Choice

To ensure reliability, purchase Mopar part # 4884594AK Valve Tappet. It is sometimes referred to as Jeep Lash Adjuster. For Mopar owners with dreams of keeping their vehicles running in prime condition, choosing OEM parts is a smart decision. Meticulously crafted, these parts follow strict factory specifications and are manufactured in top-notch facilities with advanced technologies. Furthermore, they undergo rigorous testing to ensure durability and safety, making them a reliable choice for Mopar owners. This part fits specific Jeep Compass, Patriot models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as Mopar 4884594AK Valve Tappet. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at the most economical prices possible. What's more, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly