Jeep 68141376AA A/C Pressure TRANSDUCER

You can Select Your Vehicle to check if 68141376AA fits your vehicle.

1. Disconnect the cable from the negative battery terminal. 2. Unplug the electrical connector from the air conditioning pressure switch and unscrew the switch. 3. Unscrew the pressure switch from the line, being careful not to damage the refrigerant line, and discard the O-ring seal. 4. Lubricate a new R-134a or R-1234yf compatible O-ring seal with the appropriate refrigerant oil and place it into position. 5. Screw the new switch onto the refrigerant line valve until hand-tight, and then tighten it securely. 6. Reconnect the electrical connector and the battery cable.

To replace the switch, start by disconnecting the cable(s) from the negative battery terminal(s). Then, unplug the electrical connector from the pressure switch and unscrew the old switch. Before installing the new switch, lubricate the 0-ring with clean refrigerant oil. Screw the new switch onto the refrigerant line until hand tight, then tighten it securely. Finally, reconnect the electrical connector and the negative battery cable(s).