Mopar 52005006AA Bracket-Engine Mount

You can Select Your Vehicle to check if 52005006AA fits your vehicle.

Engine mounts seldom require attention, but broken or deteriorated mounts should be replaced immediately to prevent damage or wear on the drive line components.

1. Remove the skidplate from below the engine compartment. 2. Remove the engine crossmember and the engine oil filter. 3. Use an engine hoist to raise the engine slightly to relieve the weight on the engine mounts and support the front axle with a floor jack. 4. Remove the engine mount through-bolts and the bolts attaching the engine mounts to the front axle assembly, then lower the front axle slightly. 5. Finally, remove the engine mount(s) from the vehicle, install the new mount(s) in the correct position within the bracket, and securely tighten the fasteners.